Table of Contents
Advertisement
3.4.3. Macro Tab
This tab handles assignments for the four Macro knobs on the right side of the Lower
Toolbar. You can assign multiple parameters to each one, then use
MIDI Learn [p.28]
to
assign the Macro itself to a physical control if you want.
The Side Panel's Macro Tab
Macros are saved at the Preset level.
3.4.3.1. Macro Slots
Click one of the Macro knobs to select which Macros you want to work with. The default
names are Macro 1 through Macro 4 , but you can rename them by double-clicking the name
field. The knob above the name corresponds to the knob of the same name in the Lower
Toolbar.
Arturia - User Manual CS-80 V - The User Interface
33
Advertisement
Table of Contents
