Table of Contents
Advertisement
6.3.4.11. Stereo Pan
Stereo Pan lets you automatically control and move the stereo position of each voice, to
provide motion and breadth.
AMOUNT: Rather than wet/dry mix, this FX type has an Amount control to control
•
the width of the panning effect. (0.00% to 100%)
RATE controls the movement of sounds in the stereo field. It can be set without
•
sync or with different types of sync, as explained in
20.0 Hz, or 1/32 bar to 8 bars)
MONO BASS and CUTOFF: Sometimes, autopanning very low sounds can cause
•
a mix to feel seasick and unbalanced. Clicking Mono Bass keeps low frequencies
centered, and Cutoff controls the highest frequency that's mono. (50.0 to 200
Hz)
Pan Mode (LINEAR/NATURAL) lets you choose between two types of pan motion,
•
either of which might sound better with any particular preset. Use your ears!
INVERT inverts the LFO output. The sound is the same, but if another Stereo Pan
•
is set up in Parallel routing, inverting one LFO and synchronizing the two panners
produces centered effects that widen and shrink the stereo field, as one panner
moves the sound left while the other moves the sound right.
102
FX Sync
[p.85]. (0.100 to
Arturia - User Manual CS-80 V - The Advanced Panel
Advertisement
Table of Contents
