Table of Contents
Advertisement
Your tap can dispense 3 types of water:
• Hot (boiled) filtered water Slide the hot (boiling) button across horizontally (Fig. 2) and then
simultaneously turn the handle backwards (Fig. 3), the further backwards the handle is turned the greater
the flow. It is normal for the hot water to take a moment to start and stop dispensing as the water empties
from the product after use.
• Hot & Cold (domestic) water - This is delivered when the right-side handle is tilted right (Fig. 4) to increase
flow. Cold water is 45° backwards position becoming warmer as the handle is rotated forwards (Fig. 4).
Fig 1. Off position
Care instructions for your kitchen tap mixer
To maintain the appearance of this tap, ensure that it is regularly cleaned only using a clean, soft damp cloth. A
solution of warm water and a mild liquid detergent may be used where necessary, and then the fitting rinsed
thoroughly and wiped dry. Any other cleaning action will invalidate your warranty.
Abrasive cleaners, scouring cleaners and acidic cleaners must not be used under any circumstances. Avoid
contact with all solvents (including chlorinated solvents, ketones or acetones as these may result in surface
deterioration or etching). Also avoid contact with any harsh household chemicals such as oven cleaners, drain
cleaners, rust removers, paint strippers and toilet bowl cleaners, bar keepers friend or Brasso.
Where the tap has a removable aerator on the spout exit it can be removed and cleaned periodically to
maintain optimum flow performance and remove any limescale, when reattaching please ensure to reconnect
the center stem of the aerator to the center spout flexible tube fully.
Fig 2. Slide horizontally
Fig 3. Twist anti-clockwise
Fig 4. Single lever operation
Advertisement
Table of Contents
