Attach The Wheels - InStep Take 2 Owner's Manual

ATTACH THE WHEELS

WARNING!
Wheels that are not securely locked in place may fall off the
trailer and cause serious injury or death. Always check the
wheels are securely locked in place before use.
❶ Insert the axle of the wheel into the rear wheel bracket hole.
Interlock the gear on the wheel with the gear on the rear
brake. Figure 3.8
❷ Push the wheel into the bracket until you hear the axle click
into place.
9 Take 2 Trailer
2
1
❸ Pull firmly on the wheel to ensure the locking mechanism is
engaged. Repeat these steps on the opposite side. Figure 3.9
3
Figure 3.8
Note: shown from
underside of the frame.
Figure 3.9