Attach The Rear Wheels; Insert The Safety Flag - InStep Single Seat Bicycle Trailer User Manual

Attach the Rear Wheels

Rear wheels that are not securely locked in place
may fall off the trailer and cause serious injury
or death. Always check the wheels are securely
locked in place before use.
1.
Insert the rear wheel axle into the rear wheel
bracket hole.
Wheel axle
2.
Push the wheel into the bracket until you hear
the axle click into place.
3.
Pull firmly on the wheel to ensure the locking
mechanism is engaged. Repeat these steps
on the opposite side.
8
WARNING!
Rear wheel
bracket

Insert the Safety Flag

Important!
The safety flag is an important safety
feature that warns others a trailer is present and
on the bicycle. Always have the safety flag on the
trailer when in use.
1.
Assemble the flag pole sections by
sliding the top half of the pole into the
opening of the bottom half of the pole.
2. Slide the pole into the sleeve
located near the rear corner.