1. Manuals
  2. Brands
  3. InStep Manuals
  4. Bicycle Accessories
  5. Take 2
  6. Owner's manual

InStep Take 2 Owner's Manual

Two seat bicycle trailer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
®
Take 2
TWO SEAT BICYCLE TRAILER
Owner's Manual
This manual contains safety, assembly, use and maintenance
instructions. Read these instructions carefully before use and
keep them for future reference. Your child's safety may be
affected if you do not follow these instructions. The InStep
Bicycle Trailer must be assembled by an adult who has read and
understands the instructions in this manual. Keep the packaging
away from children and dispose all packaging before use.
Do not return to store. Call toll free 1-800-242-6110 for assistance
and replacement parts.
Keep instructions for future reference.

Advertisement

Table of Contents
loading

Related Manuals for InStep Take 2

Summary of Contents for InStep Take 2

  • Page 1 Read these instructions carefully before use and keep them for future reference. Your child’s safety may be affected if you do not follow these instructions. The InStep Bicycle Trailer must be assembled by an adult who has read and understands the instructions in this manual.
  • Page 2 Thank You For purchasing the InStep Bicycle Trailer. You will be sure to enjoy hours of pleasurable exercise and family time. If you have any questions or comments our customer service hours are: 8:00 AM - 5:00 PM Monday through Friday CST.

  • Page 3: Table Of Contents

    Converting the Safety Harness for One Child ... 18 Using the Safety Harness with One Child....19 Take 2 Trailer iii...

  • Page 4: Safety

    • Never use the trailer with children who cannot sit unaided • Use caution to avoid pinch points when folding or unfolding • Check the trailer (pram) body or seat unit attachment devices the trailer. are correctly engaged before use. 1 Take 2 Trailer...

  • Page 5: Trailer Use Warnings

    • Allow extra clearance for the trailer when near curbs, parked • Over inflation of tires may result in failure and risk of serious cars, and other obstacles. injury. Do not exceed maximum pressure as shown on tires. continued on next page Take 2 Trailer 2...

  • Page 6: Recommendations

    • The maximum weight that can be carried in the cabin pockets is 1 lb. each. The maximum weight that can be carried in the rear storage area is 5 lbs. • Attach a rearview mirror on the bicycle to check on the (child/ children) in the trailer. 3 Take 2 Trailer...

  • Page 7: Parts And Features

    Elastic bands for washer and locking pin). weather shield Canopy Safety harness system Weather shield(rolls up and fastens in elastic bands) Storage area Bug screen Front panel Bicycle coupler Wheels (2) Safety strap Tow bar Clear plastic windows Take 2 Trailer 4...

  • Page 8: Assembly

    • Keep children clear when folding or unfolding the trailer. • Ensure that all locking devices are engaged before use. ❶ Lift the right side wall up into a vertical position. Figure 3.1 Figure 3.1 Figure 3.2 5 Take 2 Trailer...
  • Page 9 ❸ Rotate the crossbar into the crossbar latch. Figure 3.3 ❹ Check the crossbar is locked into place by pulling up and down on it. Figure 3.4 Release button Crossbar latch Crossbar Figure 3.4 Figure 3.3 Take 2 Trailer 6...

  • Page 10: Attach The Canopy

    ❸ Attach the hook and loop fasteners to the canopy to the strips on the front and back of the frame walls. ❹ Roll the weather shield up into the bands at the top of the canopy if you are not using Figure 3.5 7 Take 2 Trailer...

  • Page 11: Extend And Secure The Tow Bar

    ❹ Insert the locking pin through both the bracket and tow bar. ❺ Slide the metal safety loop on the end of the locking pin. Check that it is securely in place. Figure 3.7 Figure 3.6 Figure 3.7 Take 2 Trailer 8...

  • Page 12: Attach The Wheels

    Interlock the gear on the wheel with the gear on the rear brake. Figure 3.8 ❷ Push the wheel into the bracket until you hear the axle click into place. Note: shown from underside of the frame. Figure 3.8 Figure 3.9 9 Take 2 Trailer...

  • Page 13: Insert The Safety Flag

    ❶ Assemble the flag pole sections by sliding the top half of the pole into the opening of the bottom half of the pole. ❷ Insert the flag pole into the sleeve located at the rear corner of the trailer. Figure 3.10 Figure 3.10 Take 2 Trailer 10...

  • Page 14: Trailer Attachment

    ❸ Place the tab washer on the axle. Fit the tab into the slot on the bicycle frame dropout. Note: If your bicycle frame doesn’t Figure 4.2 have a slot in the drop out, rotate the tab to fit into the axle slot. Figure 4.3 Slot washer Figure 4.3 11 Take 2 Trailer...
  • Page 15 ❹ Remove the locking pin from the coupler and slide the coupler ❻ Place the hub nut and washer back onto the axle and tighten. off the end of the tow bar. Figure 4.5 Incorrect coupler placement Coupler Washer Hub nut Figure 4.4 Figure 4.5 Take 2 Trailer 12...

  • Page 16: Attachment With Quick Release

    Important! Ensure the loop of the safety pin is facing away from the wheel to prevent possible friction against the wheel and spokes of the bicycle. Figure 4.6 Inner Skewer Spring Outer Quick spring release lever Quick release lever and spring Figure 4.6 Figure 4.7 13 Take 2 Trailer...
  • Page 17 ❻ Rotate the quick release lever up and tighten. When properly tightened, the quick release lever should leave an imprint in your hand. The pressure should be firm but not excessive. Quick release lever and spring Slot washer Figure 4.9 Figure 4.8 Take 2 Trailer 14...
  • Page 18 This reduces stress on the tow bar. Figure 4.10 from the wheel to prevent possible friction against the wheel and spokes of the bicycle. ❽ Insert the locking pin into the hole on the top of the coupler. Figure 4.10 Figure 4.11 15 Take 2 Trailer...

  • Page 19: Attach The Safety Strap

    Tow bar ring ❶ Wrap the tow bar safety strap around the bicycle frame. Figure 4.12 Bicycle frame Safety strap Safety strap Figure 4.12 Figure 4.13 Take 2 Trailer 16...

  • Page 20: Using The Safety Harness

    ❺ Clip the shoulder straps into the lap belt buckle, and adjust the shoulder straps. Figure 5.1 To remove the child from the trailer: Unfasten the clips from the lap buckle. Pull the straps away from the body and remove the child from the trailer. Figure 5.1 17 Take 2 Trailer...
  • Page 21 ❹ Pull the strap and anchor all the way through to the back. Make sure the strap is properly anchored on the seat back. Repeat these steps for the opposite strap. Figure 5.2 Figure 5.2 Take 2 Trailer 18...

  • Page 22: Converting The Safety Harness For One Child

    Place the buckle top flap over and fasten with protector face the hook and loop fasteners. down Figure 5.3 Figure 5.4 19 Take 2 Trailer...
  • Page 23 ❺ Untwist the strap and re-insert the safety strap anchor through the slit to the back of the seat. Repeat steps 3-5 for the opposite side. Figure 5.5 Center Safety Harness Figure 5.5 Figure 5.6 Take 2 Trailer 20...

  • Page 24: Using The Safety Harness With One Child

    Tighten as needed. Figure 5.7 To remove the child from the trailer: Unfasten the clips from the lap buckle. Pull the straps away from the body and remove the child from the trailer. Figure 5.7 21 Take 2 Trailer...

  • Page 25: Disassembly And Storage

    ❷ Unfasten the clip on the safety strap from the tow bar ring, and unwrap it from the bicycle frame. Clip the strap back onto the D-ring of the tow bar. Figure 6.1 Figure 6.1 Figure 6.2 Take 2 Trailer 22...

  • Page 26: Disassemble The Trailer

    ❶ Remove the flag pole and separate the flag pole sections. ❷ Remove the wheels by Figure 6.4: Figure 6.3 a. Pulling the wheel release lever out and hold. b. Remove the wheel. c. Release the lever Figure 6.4 Figure 6.3 23 Take 2 Trailer...
  • Page 27 ❺ Place the locking pin back through the tow bar and bracket walls. Remove the canopy from the frame. Figure 6.6 Note: Coupler plate will remain assembled to bike 99% of the time Figure 6.5 Figure 6.6 Take 2 Trailer 24...
  • Page 28 ❿ Store in a dry place. Important! If the storage area is hot then release the some air from the tires. This will help prevent Crossbar release button excessive expansion or popping. Crossbar latch Crossbar Figure 6.7 Figure 6.8 25 Take 2 Trailer...

  • Page 29: Warranty

    To make a claim under warranty, notification of such defect must be given to Pacific Cycle, Inc. the address stated on the previous page. You will be instructed on how the product or part needing replacement should be shipped postpaid to Pacific Cycle, Inc. Take 2 Trailer 26...
  • Page 30 Manufactured for Pacific Cycle, Inc. (A Division of Dorel Industries) Pacific Cycle, Inc. 4902 Hammersley Road Madison, WI 53711 ©2016 Pacific Cycle, Inc. InStep® is a registered trademark of Pacific Cycle, Inc. www.instep.net Made in China · Printed 2016 ® 27 Take 2 Trailer...

Table of Contents