Safety; Assembly Warnings; Child Warnings - InStep Take 2 Owner's Manual

1 1

Safety

Safety
FAILURE TO FOLLOW THE SAFETY INSTRUCTIONS LISTED BELOW
MAY RESULT IN SERIOUS INJURY OR DEATH. Always read and
understand the information and warnings in this manual before
using the Bicycle Trailer.
If you are unsure of any information in this manual or have a
question regarding assembly or use please call customer service.
Always keep this manual for reference and include it with resale of
the Bicycle Trailer.

ASSEMBLY WARNINGS

• An adult who has read and understands the information and
warnings in the manual must assemble this product according
to manufacturer's instructions.
• Do not use the product if there are any missing or damaged
parts. Do not return the product to the store. Please contact
customer service at 1-800-242-6110 for assistance and
replacement parts.
• Dispose of all plastic bags and wrapping material immediately.
• Check the assembly (i.e.: crossbar locked, screws tight) before
using the product.
• Use caution to avoid pinch points when folding or unfolding
the trailer.
1 Take 2 Trailer
WARNING!
• Never allow children to assemble, fold, or disassemble
the trailer.

CHILD WARNINGS

• Each child must wear a certified helmet.
• The maximum weight capacity per child is 40 lbs. The total
weight (children and cargo) in the trailer cannot exceed 87 lbs.
• Do not use with children who exceed the weight limitations as
it increases the risk of tipping the trailer
• This trailer is intended for use with children at least 12 months
old and weighing up to 40 lbs.
• Avoid serious injury from falling or sliding out. Always use the
5-Point Safety Harness.
• Never leave children unattended in or around the trailer.
• Never have more than two children in the trailer at one time.
• When using the double trailer with one child, seat the child in
the center.
• Never use with children that cannot support their own head.
• Never use the trailer with children who cannot sit unaided
• Check the trailer (pram) body or seat unit attachment devices
are correctly engaged before use.