AC Infinity THERMOFORGE Series User Manual page 8

Environmental vpd heater
Table of Contents

Advertisement

PRODUCT WARNING
18.
The output of this product may vary and its temperature may become intense enough to burn
exposed skin. Use of this product is not recommended for persons with reduced sensitivity to
heat or an inability to react to and avoid burns.
19.
Do not place this product on a soft, elevated, or unstable surface, or in any location where it
may fall over or air intakes or exhaust can be blocked in any manner.
20.
Do not tilt, incline, or lay this product on its side or back.
21.
Be sure that the plug is fully inserted into an appropriate outlet. Please remember that
outlets also deteriorate due to aging and continuous use: check periodically for signs of
overheating or deformations as evidenced by the plug. Do not use the outlet and contact a
qualified electrician.
22.
Make sure that no pieces of polystyrene or other packaging material have been left
between elements of this product. It may be necessary to pass over this product with a
vacuum cleaner. Dispose of all packaging and product materials in an environmentally
responsible manner.
23.
Choking Hazard - this product may contain small parts. Keep away from children. If small parts
are swallowed, seek medical attention at once.
24.
Prior to cleaning, storage, or any time when this product is not in use, turn off the power
and unplug the cord to allow it to cool. Clean this product regularly, only as instructed in this
manual. Do not use gasoline, thinners, solvents, ammonias, or other chemicals for cleaning.
25.
There may be a trace of smoke or odor when this product is first operated. This indicates that
a drop of oil fell on the heating coil during the manufacturing process. It will quickly evaporate
and should not reoccur.
26.
IMPORTANT - This product has a polarized plug (one blade is wider than the other). To reduce
the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to tamper with this safety feature.
8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thermoforge t3Thermoforge t7Ac-sft3Ac-sft7

Table of Contents