PROGRAMMING
HEAT FUNCTION
AUTO MODE (LOW TEMPERATURE TRIGGER)
Pressing the up or down button sets the low
temperature trigger. Your heater will activate if the
probe's reading meets or falls below this threshold.
Once triggered, your heater will gradually ramp up to
the level set in ON Mode. If the probe's reading rises
above this trigger point, your heater will gradually
slow down to a stop or at the level set in OFF Mode.
Set a trigger point to OFF if not in use, by holding
down the up and down button. If there is a level
set in OFF Mode other than zero, your heater will
run at that level when triggered to turn off.
LOW TEMPERATURE
TRIGGER POINT
40
ON
32
COLDER
OFF
194
HOTTER
21