Table of Contents
Advertisement
PROGRAMMING
HEAT FUNCTION
CONTROLLER MODES
Holding the MODE and SETTING buttons for 3 seconds while in any mode or setting will switch your
heater between the HEAT and FAN functions. This switching is disabled if the controller is locked.
Pressing the mode button will cycle through the controller's available programming modes: OFF,
ON, AUTO, VPD, TIMER TO OFF, CYCLE (On and Off).
OFF MODE
Your heater will not run while in
this mode. The OFF Mode setting
also serves as the minimum level
the other modes will run at while
triggered OFF.
MINIMUM LEVEL
Your heater will run at the level set
in OFF Mode, as the minimum level,
when triggered to turn OFF. These
other modes include the AUTO
Mode, VPD Mode, TIMER TO OFF
Mode, and CYCLE Mode.
It will run continuously until
triggered ON, at which point it will
run at the level set in ON Mode.
If you want your heater to turn off
completely when they're triggered
to be OFF, set the OFF Mode level
to zero.
OFF MODE
MINIMUM LEVEL
19
Advertisement
Table of Contents
