Table of Contents
Advertisement
RECORDING WITH A CASSETTE DECK
RECORDING WITH TAPE 1/DAT
If the TAPE 2 MONITOR button is ON, press to turn OFF.
2. Start recording on TAPE 1/DAT cassette deck (or DAT deck).
3. Play the desired program source (record, compact disc, etc.).
* The volume, balance and tone controls have no effect on the
recording.
RECORDING WITH TAPE 2
1. Select the source you want to record from with the INPUT
_ SELECTOR buttons.
2. Start recording on the TAPE 2 cassette deck.
3. Play the desired program source (record, compact disc, etc.).
VIDEO RECORDING
USING VCR 1, VCR 2 FOR AUDIO RECORDING
COPYING TAPES
Goolltltiyt
ttt]
The following operations concern TAPE 1 to TAPE 2 copying. TAPE 2
to TAPE 1 copying is not possible.
1. Press the TAPE 1/DAT INPUT SELECTOR button.
3. Load the TAPE 2 cassette deck with a tape to record to.
4. Start recording on the TAPE 2 cassette deck.
5. Start playback on the TAPE 1/DAT cassette deck (or DAT deck).
Tape monitoring
Refer to the connection procedures on pages 7 to 14 and refer to the
VCR's Operating Instructions regarding proper operation procedures.
Recording can be performed on both VCR 1 and VCR 2.
26
<ARB1421>
to the front panel VIDEO INPUT jacks —+ VIDEO
2. Begin recording on the VCR.
¢ For VCR, select a line input (external input)
Advertisement
Table of Contents
