HP 3000 Series Installation And Service Manual page 57

Conf igur ing MPE
THE CONFIGURATION DIALOGUE
The following instructions deal only with configuring an INP.
The complete configuration dialogue is given in the System
Manager / System Supervisor Reference Manual.
To begin, log onto the system, define the output files, and
initiate a SYSDUMP as shown:
NOTE
Where it is necessary to distinguish
user input from computer output, the
input is underlined.
: HELLO MANAGER.SYS
:FILE TiDEV=TAPE
:FILE LiDEV=LP
: S YSDU MP *T,*L
STEP NO.
PROMP'l: AND RESPONSE
1. ANY CHANGES? YES
2. SYSTEM ID=HP 32002 v. uu .ff?· return
3. MEMORY SIZE? return
3.1 I/O CONFIGURATION CHANGES? YES
3.2 LIST I/O DEVICES? YES or NO
3.3 LIST CS DEVICES? YES or NO
3.4 HIGHEST DRT = xx.?
xx is the current highest hardware device address that
can be assigned. Press RETURN if xx is satisfactory.
Otherwise, enter a higher DRT number.
A-2