Pushing The Appliance Into The - Thermador T18 Series Installation Instructions Manual

1
1. Pushing the appliance into the installation cavity
Caution when pushing the appliance into the installa-
tion cavity. Do not damage the water pipe or power
cord attached to tne floor.
When the floor or the appliance is tilted in comparison
to the installation cavity adjust neight adjustable wheels
before you move the appliance into the installation
cavity.
Put the mains plug into the socket.
In the case of Side-by-Side appliances a separate
socket must be used for each appliance.
Prevent ine power cord from becoming caught.
Tie a piece of string to the middie of the power cord and
feed forwards under the appliance. When pushing in the
appliance, oull the cable forwards.
or
Using adhesive tape, stick the power cord to the floor
centrally behind the appliance approx. 15" (380 mm)
away from the rear panel of the cavity.
Remove edge protection.
25