Charging The Battery - Vivitar Vivicam 5340s User Manual

Charging the Battery

The state-of-charge of the battery will affect the performance of Vivicam 5340s. To maximize battery
performance and lifetime, it is recommended that you fully charge the battery using the optional AC
power adapter and then fully discharge it (through normal use) at least one time. Please note that
Vivicam 5340s must be powered off before charging the battery. Otherwise, the power will be provided
only to Vivicam 5340s.
1. Place Vivicam 5340s on the cradle. Connect the AC power
adapter to the jack on the cradle labeled "DC IN 5V".
2. Connect the other end of the AC power adapter to a wall
outlet.
Charging time differs depending on the ambient
temperature and the status of battery.
Vivicam 5340s must be used with the specified AC power adapter. Damage caused by the use of an incorrect
adapter is not covered under the warranty.
Always make sure that Vivicam 5340s is off before removing the battery.
The battery may feel warm after it has been charged or immediately after being used. This is normal and not a
malfunction.
When using Vivicam 5340s in cold environments, keep Vivicam 5340s and its battery warm by holding it inside
your jacket or other warm protective environment.
The battery is not fully charged at shipment and must be fully charged before being used.
EN-19