Charging The Battery - Vivitar Vivicam 3945s User Manual

Charging the Battery

The state-of-charge of the battery will affect the performance of the digital still
ViviCam 3945s. To maximize battery performance and lifetime, it is recommended
that you fully charge the battery using the optional AC power adapter and then
fully discharge it (through normal use) at least one time. Make sure that the
power of the digital still ViviCam 3945s is off and then insert the battery before
starting.
1. Insert the conversion adapter into the
conversion adapter terminal of the
V i v i C a m 3 9 4 5 s a s s h o w n i n t h e
illustration.
2. Connect one end of the AC power
adapter to the DC IN terminal of the
conversion adapter.
3. Connect the other end of the AC power
adapter to a wall outlet.
Charging time differs depending on
the ambient temperature and the
status of battery.
EN-16
The digital still ViviCam 3945s must be used with the specified AC power
adapter. Damage caused by the use of an incorrect adapter is not
covered under the warranty.
Always make sure that the digital still ViviCam 3945s is off before
removing the battery.
The battery may feel warm after it has been charged or immediately after
being used. This is normal and not a malfunction.
When using the digital still ViviCam 3945s in cold environments, keep
the digital still ViviCam 3945s and its battery warm by holding it inside
your jacket or other warm protective environment.