Vivitar Vivicam 5385 User Manual

Vivitar Vivicam 5385 User Manual

Vivitar vivicam 5385: user guide
Table of Contents

Advertisement

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)
This device may not cause harmful interference, and
(2)
This device must accept any interference received, including interference that may cause undesired
operation.
Note:
This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15
of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the manual.
If such changes or modifications should be made, you could be required to stop operation of the
equipment.
EN-1

Advertisement

Table of Contents
loading

Summary of Contents for Vivitar Vivicam 5385

  • Page 1: Fcc Statement

    FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation.
  • Page 2: Read This First

    Contact your dealer for precise product definition and included accessories. The manufacturer assumes no liability for any errors or discrepancies in this user manual. For user manual and driver updates, refer to the Vivitar website or contact your dealer. EN-2...
  • Page 3: Safety Instructions

    SAFETY INSTRUCTIONS Read and understand all Warnings and Cautions before using this product. Warnings If foreign objects or water have entered the camera, turn the power OFF and remove the batteries and the AC power adapter. Continued use in this state might cause fire or electric shock. Consult the store of purchase. If the camera has fallen or its case has been damaged, turn the power OFF and remove the batteries and the AC power adapter.
  • Page 4 Cautions Insert the batteries paying careful attention to the polarity (+ or –) of the terminals. Inserting the batteries with its polarities inverted might cause fire and injury, or damage to the surrounding areas due to the battery rupturing or leaking. Do not fire the flash close to anyone’s eyes.
  • Page 5: Notes On Battery Usage

    Remove the batteries if the ViviCam 5385 will not be used for an extended period of time. The batteries may leak and cause a fire, injury or soiling of the battery compartment. If the batteries leak, clean and wipe the battery compartment carefully and install new batteries.
  • Page 6: Table Of Contents

    CONTENTS INTRODUCTION ... 8 Package Contents... 9 GETTING TO KNOW YOUR VIVICAM 5385... 10 Front View... 10 Rear View... 11 Mode Dial ... 12 LCD Monitor Information... 13 PREPARING YOUR VIVICAM 5385... 15 Installing the Batteries (Optional Accessory) ... 15 Using the AC Power Adapter (Optional Accessory)...16...
  • Page 7 Protecting Images/Video Clips ... 45 TRANSFERRING FILES FROM YOUR VIVICAM 5385 TO COMPUTER...46 Step 1: Install the Windows 98 USB driver ...47 Step 2: Connect the ViviCam 5385 to your computer...48 Step 3: Download images or video clips...49 EDITING SOFTWARE INSTALLATION...50 Installing Photo Explorer...50...
  • Page 8: Introduction

    INTRODUCTION Thank you for purchasing the new ViviCam 5385! Equipped with a 5.0 Megapixels CCD sensor, your ViviCam 5385 delivers good quality, 2560 x 1920 resolution images. Other features provided by the camera include the following: 5.0 Megapixels A high-resolution CCD sensor provides 5.0 megapixels for good quality of images.
  • Page 9: Package Contents

    Carefully unpack your kit box and ensure that you have the following items. In the event that any item is missing or if you find any mismatch or damage, promptly contact your dealer. Common Product Components: ViviCam 5385 Digital Camera User’s Manual USB Cable...
  • Page 10: Getting To Know Your Vivicam 5385

    GETTING TO KNOW YOUR VIVICAM 5385 Front View 1. Shutter button 2. Flash 3. Microphone 4. Lens 5. Power button EN-10 6. Mode dial 7. Self-timer LED 8. Viewfinder window 9. PC (USB) / AV Out terminal 10.DC in 3V terminal...
  • Page 11: Rear View

    Rear View 1. Viewfinder Rec-play button Menu button Delete button 5. OK / (Display) button 6. Tripod socket Zoom out (wide-angle) button Thumbnail button Zoom in (telephoto) button 9. LCD monitor Arrow button (Up) Arrow button (Right) Self-timer button Arrow button (Down) Arrow button (Left) Flash button 14.
  • Page 12: Mode Dial

    Use this mode to take images of distant scenery or landscapes. Use this mode to shoot fast moving objests. Select this option to take images of people against a dusk or night-time background. Select this mode to adjust the ViviCam 5385 settings.
  • Page 13: Lcd Monitor Information

    LCD Monitor Information Camera Mode 1. Mode indication [ A ] Auto Mode ] Setup Mode ] Video Mode ] Landscape Mode ] Program Mode ] Sports Mode ] Portrait Mode ] Night Mode 2. Image quality ] FINE ] NORMAL ] ECONOMY 3.
  • Page 14 Video Mode 1. Video mode 2. Recordable movie time available 3. SD memory card indicator (if present) 4. Battery power indicator 5. Focus area Image Playback 1. Playback mode 2. SD memory card indicator (if present) 3. Battery power indicator 4.
  • Page 15: Preparing Your Vivicam 5385

    PREPARING YOUR VIVICAM 5385 Installing the Batteries (Optional Accessory) You can use 2 AA size batteries to power your ViviCam 5385. Make sure that the power of the ViviCam 5385 is off before inserting or removing the batteries. 1. Make sure your ViviCam 5385 is turned off.
  • Page 16: Using The Ac Power Adapter (Optional Accessory)

    "DC IN 3.0V". 3. Connect the other end to an electrical outlet. Make sure to use only the AC power adapter specified for the ViviCam 5385. Damage caused by the use of an incorrect adapter is not covered under the warranty.
  • Page 17: Inserting And Removing An Sd Memory Card (Optional Accessory)

    Inserting and Removing an SD Memory Card (Optional Accessory) The ViviCam 5385 comes with 12MB of internal memory, allowing you to store captured still images or video clips in the ViviCam 5385. Moreover, you can also expand the memory capacity by using an optional SD (Secure Digital) memory card so that you can store more files.
  • Page 18: Attaching The Camera Strap

    Blinking green LED indicator Blinking red Self-timer indicator Blinking red EN-18 Description/Activity The digital camera is powering up. The digital camera is ready to record images (or movies). USB communication/transfer in progress Charging the flash. The self-timer function is activated.
  • Page 19: Getting Started

    GETTING STARTED Turning the Power On/Off Press the button until the ViviCam 5385 turns on. To turn the power off, press the Choosing the Screen Language When the camera is turned on for the first time, a language-selection screen will be displayed in the monitor.
  • Page 20: Setting The Date And Time

    To decrease a value, slide the zoom lever to the The time is displayed in 24-hours format. 5. Press the button after all fields are set. EN-20 and turn your ViviCam 5385 on by button. to switch the date types. button. button.
  • Page 21: Formatting An Sd Memory Card Or Internal Memory

    When you format an SD memory card, be aware that all data of which will be permanently erased. Protected images are also erased. To format the internal memory, do not insert a memory card into the ViviCam 5385. Otherwise, you will format the memory card.
  • Page 22: Using The Lcd Monitor

    Using the LCD Monitor ViviCam 5385 is equipped with a 1.8" full color TFT LCD monitor to help you compose images, replay recorded images/video clips or adjust menu settings. The mode icons, text and numbers displayed on the monitor may very according to the current settings.
  • Page 23: Photography Mode

    PHOTOGRAPHY MODE Shooting Images - The Basics 1. Rotate the mode dial to A , P , ViviCam 5385 on by pressing the 2. Compose the image on the monitor screen so that the main subject is within the focus frame.
  • Page 24: Setting Image Resolution And Quality

    Setting Image Resolution and Quality As you get to know the ViviCam 5385, you can set the image resolution (number of vertical and horizontal pixels) and image quality (compression ratio) based on the types of images you want to shoot.
  • Page 25: Using The Zoom Function

    Using the Zoom Function This camera is equipped with 3x optical zoom. The lens moves during the optical zoom photography, allowing you to capture telephoto and wide-angle shots. By using the optical zoom function; images appear closer by pressing the button, or smaller away by pressing the Moreover, you can further enlarge the subjects with 4x digital zoom by pressing continuously the button.
  • Page 26: Using The Flash

    When taking photographs, the red-eye phenomenon can be reduced by asking the subject (person) to look at the ViviCam 5385 or get as close to the ViviCam 5385 as possible. FORCED FLASH The flash will always fire regardless of the surrounding brightness. Select this mode for recording images with high contrast (backlighting) and deep shadows.
  • Page 27: Using The Self-Timer

    The self-timer can be used in situations such as group shots. When using this option, you should either mount the ViviCam 5385 on a tripod (recommended) or rest it on a flat, level surface. 1. Secure the ViviCam 5385 to a tripod or place it on a stable surface.
  • Page 28: Adjusting The Exposure (Ev Compensation)

    Adjusting the Exposure (EV Compensation) You can manually adjust the exposure determined by the ViviCam 5385. Use this mode when the proper exposure cannot be obtained, for example, when the contrast (different between light and dark) between the subject and the background is extremely large. The EV compensation value can be set in the range from –2.0EV to +2.0EV.
  • Page 29: Setting White Balance

    Setting White Balance This feature lets you make adjustments to compensate for different lighting types according to your shooting conditions. 1. Rotate the mode dial to P , 2. Press the button to turn on the power. 3. Press , then toggle to select the [AE/AWB] menu.
  • Page 30: Using The Mode Dial

    Program Mode In P (Program) mode, the ViviCam 5385 automatically sets the shutter speed and aperture for taking still images. You can adjust other functions, such as flash mode or continuous shooting mode. 1. Rotate the mode dial to P mode and turn your ViviCam 5385 on by pressing the button.
  • Page 31: Portrait Mode

    Portrait Mode Select this mode to make people stand out with the background out-of-focus. 1. Rotate the mode dial to mode and turn your ViviCam 5385 on by pressing the button. 2. Compose your subject within the focus frame. 3. Press the shutter button to capture the image.
  • Page 32: Sport Mode

    1. Rotate the mode dial to on by pressing the button. 2. Compose your subject within the focus frame. 3. Press the shutter button to capture the image. EN-32 mode and turn your ViviCam 5385 mode and turn your ViviCam 5385 1.5x 2004.09.17 1.5x 2004.09.17...
  • Page 33: Advanced Shooting

    This mode is used for continuous shooting. Pictures are taken continuously while the shutter release button is pressed. 1. Rotate the mode dial to P , ViviCam 5385 on by pressing the 2. Press , then use to select the [FUNCTION] menu.
  • Page 34: Auto Exposure Bracketing (Aeb)

    Auto Exposure Bracketing (AEB) In this mode, the ViviCam 5385 automatically changes the exposure within a set range to take three shots after you press the shutter button once. AEB settings can be combined with exposure compensation settings to extend the adjustment range.
  • Page 35: Selecting The Metering Mode

    You can select the metering mode that sets which part of the subject to measure to determine the exposure. 1. Rotate the mode dial to P , ViviCam 5385 on by pressing the 2. Press , then use to select the [FUNCTION] menu.
  • Page 36: Playback Mode - The Basics

    PLAYBACK MODE - THE BASICS Viewing Images You can display the still images you have just captured at a time. 1. Press the button to turn on the ViviCam 5385. 2. Press the (Playback) button. The last recorded image appears on the LCD monitor.
  • Page 37: Magnifying Images

    Magnifying Images While reviewing your images, you may enlarge a selected portion of an image. This magnification allows you to view fine details. The zoom factor displayed on the screen shows the current magnification ratio. 1. Press the (Playback) button. The last recorded image appears on the LCD monitor.
  • Page 38: Thumbnail Display

    Thumbnail Display This function allows you to view 9 thumbnail images on the LCD monitor simultaneously so you may search for a particular image. 1. Press the (Playback) button. The last recorded image appears on the LCD monitor. 2. Press the button once.
  • Page 39: Slideshow Display

    Slideshow Display The slide show function enables you to play your images back automatically in sequential order. This is very useful and entertaining feature for reviewing recorded images and for presentations. 1. Press the (Playback) button. The last recorded image appears on the LCD monitor. 2.
  • Page 40: Resizing An Image

    Resizing an Image You can change the image size of a captured image to one of the following sizes: 2560 x 1920 pixel, 2048 x 1536 pixel, 1280 x 960 pixel and 640 x 480 pixel. 1. Press the (Playback) button. The last recorded image appears on the LCD monitor.
  • Page 41: Video Mode

    Recording Video Clips This mode allows you to record video clips with sound via built-in microphone. 1. Rotate the mode dial to mode and turn your ViviCam 5385 on by pressing the button. 2. Press the shutter button to start recording.
  • Page 42: Playing Back Video Clips

    Playing Back Video Clips You can play back recorded video clips. A guide to operation appears on the LCD monitor during the video playback. 1. Press the (Playback) button. 2. Use to go through the images until the video clip you want to play back is displayed.
  • Page 43: Playback Mode - Advanced Features

    NTSC/PAL system to match the video output system of the video equipment you are going to connect to the ViviCam 5385, then turn all connected devices off. 1. Connect one end of the A/V cable to the A/V terminal of the ViviCam 5385.
  • Page 44: Deleting Images/Video Clips

    Deleting Images/Video Clips Use this function to delete one or all images/video clips stored in the internal memory or memory card. Please note that the deleted images or video clips cannot be recovered. Exercise caution before deleting a file. To delete the latest single image/video clip 1.
  • Page 45: Protecting Images/Video Clips

    Protecting Images/Video Clips Set the data to read-only to prevent images from being erased by mistake. 1. Press the (Playback) button. The last recorded image appears on the LCD monitor. 2. In (Playback) mode, use To view the previous image, press the To view the next image, press the 3.
  • Page 46: Transferring Files From Your Vivicam 5385 To Computer

    TO COMPUTER After using USB cable to establish a USB connection between the ViviCam 5385 and your computer, you can use your computer to share recorded images or video clips with your family or friends via e-mail or post them on the Web.
  • Page 47: Step 1: Install The Windows 98 Usb Driver

    Follow the on-screen instructions to complete the installation. 3. After the USB driver has been installed, restart your computer. Installation on MAC OS X For Mac OS X, the computer will automatically recognize the ViviCam 5385 and load its own USB drivers. EN-47...
  • Page 48: Step 2: Connect The Vivicam 5385 To Your Computer

    Step 2: Connect the ViviCam 5385 to your computer 1. Turn your ViviCam 5385 on by pressing the one end of the USB cable to an available USB port on your computer. 2. There will be a new “Removable Disk” icon detected in “My Computer”, in which contains your recorded images or video...
  • Page 49: Step 3: Download Images Or Video Clips

    Step 3: Download images or video clips When the ViviCam 5385 is turned on and connected to your computer, it is considered to be a disk drive, just like a floppy disk or CD. You can download (transfer) images by copying them from the “Removable disk”...
  • Page 50: Editing Software Installation

    E-mail, Print, Slideshow Presentations. It is an indispensable all-in-one tool for owners of ViviCam 5385, DV camcorders, scanners, or anyone who strives to effectively organize a large collection of digital media.
  • Page 51: Installing Photo Express

    Acquire digital photos effortlessly from ViviCam 5385 or scanners. Organize them conveniently with the Visual Browse mode. Use hundreds of ready-to-use templates such as albums, cards, posters, slideshows, and more.
  • Page 52: Installing Adobe Acrobat Reader

    INSTALLING ADOBE ACROBAT READER The CD-ROM includes a PDF (portable document format) copy of the user’s manual. To view a PDF you must have Adobe Acrobat Reader installed in your computer. Adobe Acrobat Reader is included on the camera CD ROM. Using Adobe Acrobat Reader, you can read the user’s manual and print sections of interest.
  • Page 53: User Manual

    User Manual on the CD-ROM is that you have Acrobat Reader (Adobe Reader) installed on your computer. Updates to this manual, and versions in other languages may be found on the Vivitar website (www.vivitar.com). 1. Insert the CD-ROM that came with the camera into the CD-ROM drive.
  • Page 54: Menu Options

    FINE NORMAL ECONOMY EN-54 PICTURE FUNCTION AUTO 1 / 3 1 / 5 and turn your ViviCam 5385 on. to select the [PICTURE] / [FUNCTION] / [AE/AWB] menu. to access in menu directly. button. PICTURE FUNCTION AE/AWB EXPOSURE +0.7 W.BALANCE 1 / 3 button.
  • Page 55 Item Functional Description FOCUS You can take images with the distance to the subject set by auto focus, macro or infinity. AUTO MACRO INFINITY CAPTURE Sets the recording method at the time of taking pictures. MODE SINGLE BURST In P , Mode PICTURE Item...
  • Page 56 FULL COLOR BLACK & WHITE SEPIA To capture an image, your ViviCam 5385 offers you three different degrees of color to match with your preference. Your images will demonstrate different impression by selecting different degrees of color. This is called “Saturation”.
  • Page 57 AE/AWB Item Functional Description EXPOSURE Sets to obtain the correct exposure when the subject is much brighter or darker than the background. The EV compensation value can be set in the range from –2.0EV to +2.0EV. W. BALANCE Sets the white balance photographing under a variety of lighting conditions and permits photographs to be taken that approach the conditions that are seen by the human eye.
  • Page 58: Video Menu

    3. To exit from the playback menu, press the Item Functional Description COLOR REFER TO “Camer Menu-In In P , EN-58 COLOR FULL COLOR BLACK & WHITE SEPIA 1 / 3 EXIT : mode and turn your ViviCam 5385 on. button. Mode” of MENU OPTIONS.
  • Page 59: Playback Menu

    Playback Menu In the (Playback) menu, set which settings are to be used for playback. PLAYBACK RESIZE COPY TO CARD COPY 1 / 6 SET : 1. Press the (Playback) button. The last recorded image appears on the LCD monitor. 2.
  • Page 60 1280x960 640x480 COPY TO Allows you to copy your files from the ViviCam 5385's internal memory to a CARD memory card. Of course, you can only do this if you have a memory card installed and some files in internal memory.
  • Page 61: Setup Menu

    Setup Menu This feature allows you to set up the default settings by preference for using your ViviCam 5385. BASIC RESET NUMBER LOUDER 3 MIN. DATE IMPRINT POWER OFF FORMAT DIGITAL ZOOM SET TO DEFAULT SET : 1 / 7 1.
  • Page 62 * ON / OFF FORMAT Erases all images and reformats the SD card loaded in your ViviCam 5385. Protected images are also erased. SD card cannot be formatted if it is write-protected. Refer to section in this manual titled “Formatting an SD Memory Card or Internal Memory”...
  • Page 63 * Y/M/D Y/M/D * D/M/Y * M/D/Y Sets video output system of the video equipment that you are going to connect to the ViviCam 5385. NTSC * PAL / NTSC LANGUAGE Sets the language that is displayed on the LCD monitor.
  • Page 64: Connecting Your Vivicam 5385 To Other Devices

    CONNECTING YOUR VIVICAM 5385 TO OTHER DEVICES EN-64...
  • Page 65: Vivicam 5385 Specifications

    VIVICAM 5385 SPECIFICATIONS Item Description Effective pixels 5.0 Mega pixels Image size Still image: 2560 x 1920, 2048 x 1536, 1280 x 960, 640 x 480 Video clip: 320 x 240 Image quality Still image: Fine, Normal, Economy Movie image: Economy...
  • Page 66: Appendix

    * Memory is full. when the shutter button is pressed. * NO FLASH is selected in flash mode. Flash does not fire. * ViviCam 5385 is in BURST/AEB/ (Video) mode. Continuous shooting * The capacity of the built-in memory or is not possible.

Table of Contents