Vivitar Vivicam 5340s User Manual
  1. Manuals
  2. Brands
  3. Vivitar Manuals
  4. Digital Camera
  5. Vivicam 5340s
  6. User manual

Vivitar Vivicam 5340s User Manual

Vivitar vivicam 5340s: user guide
Hide thumbs
Table of Contents

Advertisement

Quick Links

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
Note:
This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the manual.
If such changes or modifications should be made, you could be required to stop operation of the
equipment.
EN-1

Advertisement

Table of Contents
loading

Related Manuals for Vivitar Vivicam 5340s

Summary of Contents for Vivitar Vivicam 5340s

  • Page 1: Fcc Statement

    FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

  • Page 2: Read This First

    This User Manual is a general reference guide for the product. The product and accessories that come with your Vivicam 5340s may be different from those described in this manual. This is due to the fact that different retailers often specify slightly different product inclusions and accessories to suit their market requirements, customer demographics, and geographical preferences.

  • Page 3: Safety Instructions

    SAFETY INSTRUCTIONS Read and understand all Warnings and Cautions before using this product. Warnings If foreign objects or water have entered the camera, turn the power OFF and remove the batteries and the AC power adapter. Continued use in this state might cause fire or electric shock. Consult the store of purchase. If the camera has fallen or its case has been damaged, turn the power OFF and remove the batteries and the AC power adapter.
  • Page 4 Cautions Insert the batteries paying careful attention to the polarity (+ or –) of the terminals. Inserting the batteries with its polarities inverted might cause fire and injury, or damage to the surrounding areas due to the battery rupturing or leaking. Do not fire the flash close to anyone’s eyes.

  • Page 5: Notes On Battery Usage

    Notes on Battery Usage When you use the battery, carefully read and strictly observe the Safety Instructions and the notes described below: Different battery types and surrounding temperatures may affect the battery performance. Avoid using batteries in extremely cold environments as low temperatures can shorten the battery life and reduce camera performance.

  • Page 6: Table Of Contents

    CONTENTS INTRODUCTION... 8 Package Contents... 9 GETTING TO KNOW YOUR VIVICAM 5340S.. 10 Front View... 10 Rear View ... 11 Control Buttons ...12 Top View of Docking Cradle...12 LCD Monitor Information... 13 PREPARING VIVICAM 5340S...17 Installing the Battery ...17 Docking Cradle...18 Charging the Battery...
  • Page 7 TRANSFERRING FILES FROM YOUR VIVICAM 5340S TO YOUR COMPUTER... 52 Step 1: Install the USB driver (Windows 98/98SE users only)... 53 Step 2: Connect Vivicam 5340s to your computer...54 Step 3: Download images, video clips or voice- recording files... 55 EDITING SOFTWARE INSTALLATION...56...

  • Page 8: Introduction

    INTRODUCTION Thank you for purchasing the new Vivicam 5340s! Equipped with a 5.0 Megapixels CCD sensor, your Vivicam 5340s delivers good quality, 2560 x 1920 resolution images. Other features provided by Vivicam 5340s include the following: 5.0 Megapixels A high-resolution CCD sensor provides 5.0 megapixels for good quality of images.

  • Page 9: Package Contents

    Carefully unpack your kit box and ensure that you have the following items. In the event that any item is missing or if you find any mismatch or damage, promptly contact your dealer. Common Product Components: Vivicam 5340s Digital Still Camera User’s Manual USB Cable...

  • Page 10: Getting To Know Your Vivicam 5340S

    GETTING TO KNOW YOUR VIVICAM 5340S Front View 1. Self-timer LED 2. Shutter button 3. Power button 4. Strap eyelet EN-10 5. Battery/SD memory card cover 6. Lens 7. Auto-Focus auxiliary LED 8. Flash 9. Microphone...

  • Page 11: Rear View

    Rear View 1. LED indicator 2. W / Zoom out (Wide-angle) button Thumbnail button 3. T / Zoom in (Telephoto)button Menu button 5. MODE button 6. Control buttons Delete button Display (LCD on/off) button 9. Tripod socket 10.Docking station terminal (DC IN 5V port/USB port) 11.LCD monitor 12.Speaker...

  • Page 12: Control Buttons

    Control Buttons ( ) Flash button Playback button 3. SCN ( ) Scene Mode button ) Self-Timer button 5. OK button Top View of Docking Cradle 1. Cradle 2. USB port 3. AV-OUT port 4. DC IN 5V port 5. Cradle plug EN-12...

  • Page 13: Lcd Monitor Information

    LCD Monitor Information Camera Mode 1. Camera mode 2. Image quality ] Super Fine [ ] Fine [ ] Normal 3. Image size ] 2560 x 1920 ] 2048 x 1536 ] 1280 x 960 ] 640 x 480 [ ] TIFF IMAGE 4.
  • Page 14 Movie Mode 1. Movie mode 2. Recordable movie time available 3. Resolution for video clips 4. SD memory card indicator (if present) 5. Battery power indicator 6. Time 7. Date 8. Zoom state Audio Mode 1. Audio mode 2. Current file/ total number of audio files 3.

  • Page 15: Image Playback

    Image Playback 1. Play mode 2. Playback frame number 3. SD memory card indicator (if present) 4. Battery power indicator 5. Image size 6. Camera mode Video Playback 1. Play mode 2. Total of recorded time 3. Resolution for video clips 4.

  • Page 16: Led Indicators

    LED indicator Solid green Blinking green USB transfer is in progress. Self-timer indicator Blinking blue EN-16 Description/Activity 1.Vivicam 5340s is powering up. 2.Vivicam 5340s is in the process of battery charge. USB communication is in progress. The self-timer function is activated.

  • Page 17: Preparing Vivicam 5340S

    Installing the Battery We highly recommend you to use the specified rechargeable lithium-ion battery to realize the full capability of your Vivicam 5340s before initial use. Make sure that the power of Vivicam 5340s is off before inserting or removing the battery.

  • Page 18: Docking Cradle

    Docking Cradle With the docking cradle, you can position your Vivicam 5340s and connect it to other media devices to play back your images, video clips, or voice recording files (output to a TV monitor or another recorder recording device, for example) on your desktop. The cradle will facilitate the battery charge of Vivicam 5340s in conjunction with an AC power adapter.

  • Page 19: Charging The Battery

    Charging time differs depending on the ambient temperature and the status of battery. Vivicam 5340s must be used with the specified AC power adapter. Damage caused by the use of an incorrect adapter is not covered under the warranty. Always make sure that Vivicam 5340s is off before removing the battery.

  • Page 20: Using The Ac Power Adapter (Optional Accessory)

    “DC IN 5V”. 3. Connect the other end to an electrical outlet. Make sure to use the specified AC power adapter of Vivicam 5340s. Damage caused by the use of an incorrect adapter is not covered under the warranty.

  • Page 21: Inserting And Removing An Sd Memory Card (Optional Accessory)

    Vivicam 5340s comes with 10MB of internal memory, allowing you to store video clips, captured images, or voice recording files in Vivicam 5340s. However, you can also expand the memory capacity by using an optional SD (Secure Digital) memory card so that you can store more files.

  • Page 22: Getting Started

    Vivicam 5340s turns on. To turn the power off, press and hold the Entering the Main Menu After turning on Vivicam 5340s, the Main Menu screen appears. Follow the steps below to select the desired mode: 1. Press the button to turn on the power.

  • Page 23: Setting The Date And Time

    Setting the Date and Time The date/time setting screen will automatically appear: When first turning Vivicam 5340s on. When turning the power on after leaving Vivicam 5340s without battery for an extended period of time. 1. Press the button to turn on Vivicam 5340s.

  • Page 24: Choosing The Screen Language

    Follow the steps below to specify in which language menus and messages are to be displayed on the LCD monitor from the following: and ESPAÑOL. 1. Press the button to turn on Vivicam 5340s. 2. Press the MODE button to access in [ , then press the OK button. 3. Press to select the [CUSTOM] menu.

  • Page 25: Formatting An Sd Memory Card Or Internal Memory

    When you format an SD memory card, be aware that all data of which will be permanently erased. Protected images are also erased. To format the internal memory, do not insert a memory card into Vivicam 5340s. Otherwise, you will format the memory card.

  • Page 26: Setting Image Resolution And Quality

    Setting Image Resolution and Quality As you get to know Vivicam 5340s, you can set the image resolution (number of vertical and horizontal pixels) and image quality (compression ratio) based on the types of images you want to shoot. These settings affect the number of images that can be stored in memory, or on a memory card.

  • Page 27: Using The Lcd Monitor

    Using the LCD Monitor Your Vivicam 5340s is equipped with a 1.9" full color TFT LCD monitor to help you compose images, replay recorded images/video clips or adjust menu settings. The mode icons, text and numbers displayed on the monitor may vary according to the current settings.

  • Page 28: Camera Mode

    CAMERA MODE Capturing Images 1. Press the button to turn on the power. 2. Press the MODE button to access in [ , , , or , then press the OK button. 3. Compose the image on the monitor screen so that the main subject is within the focus frame.

  • Page 29: Scene Modes

    Scene Modes Your Vivicam 5340s offers you seven scene modes to capture images easily in a situation that is programmed to handle all adjustments for you by selecting the following shooting conditions. EN-29...
  • Page 30 4. Compose the image and then press the shutter button. Note for the following functions according to the desired scene from a menu: Vivicam 5340s will automatically adjust the focus and exposure depending on the settings AUTO of ISO sensitivity and White Balance.

  • Page 31: Using The Zoom Function

    Moreover, you can further enlarge the subjects with 4x digital zoom by pressing continuously the T button. It is activated after your Vivicam 5340s reaches its maximum optical zoom factor (3x). A useful feature as it is, however, the more the image is magnified, the grainer the image may become.

  • Page 32: Using The Macro (Close-Up) Mode

    Using the Macro (Close-Up) Mode With this mode, Vivicam 5340s’ lens switches the auto focus system to focus on subjects that are much closer to the lens. This feature allows you to shoot close-up objects, such as small insects or flowers to get the smallest detail.

  • Page 33: Using The Flash

    The flash mode you set will be displayed on the LCD monitor. 4. Compose your scene and press the shutter button. Vivicam 5340s has four flash modes: Red Eye, No Flash(default), Auto Flash and Forced Flash. The table below will help you to choose the appropriate flash mode:...

  • Page 34: Using The Self-Timer

    Using the Self-Timer The self-timer can be set in [ 1. Secure Vivicam 5340s to a tripod or place it on a stable surface. 2. Press the button to turn on the power. 3. Toggle to select the desired self-timer mode.

  • Page 35: Adjusting The Exposure

    Adjusting the Exposure You can manually adjust the exposure determined by Vivicam 5340s. Use this mode when the proper exposure cannot be obtained, for example, when the contrast (different between light and dark) between the subject and the background is extremely large. The EV compensation value can be set in the range from –2.0EV to +2.0EV.

  • Page 36: Setting White Balance

    Setting White Balance This feature lets you make adjustments to compensate for different lighting types according to your shooting conditions. 1. Press the MODE button to access in [ , , or , then press the OK button. 2. Press , then toggle 3.

  • Page 37: Advanced Shooting

    ADVANCED SHOOTING Continuous Capture This mode is used for continuous capture. Images are taken continuously while the shutter release button is pressed. 1. Press the MODE button to access in [ , , or , then press the OK button. 2.

  • Page 38: Auto Exposure Bracketing (Aeb)

    Auto Exposure Bracketing (AEB) In this mode, Vivicam 5340s automatically changes the exposure within a set range to take three shots after you press the shutter button once. AEB settings can be combined with exposure compensation settings to extend the adjustment range.

  • Page 39: Adjust White Balance Manually

    Adjust White Balance Manually Manual white balance lets you configure Vivicam 5340s for a particular light source and other conditions. Note that you must perform manual white balance under the same conditions you will be shooting under. You must also have a white piece of paper or other similar object on hand in order to perform this function.

  • Page 40: Play Mode - The Basics

    PLAY MODE - THE BASICS In the [ (PLAY) ] mode, you can view, magnify, delete images or play video clips back. This mode also provides thumbnail images display and slide show, allowing you to quickly search for the desired image. Viewing Images 1.

  • Page 41: Magnifying Images

    Magnifying Images While reviewing your images, you may enlarge a selected portion of an image. This magnification allows you to view the details. The zoom factor is displayed on the screen, showing the current magnification ratio. Images that are being playback can be enlarged in 14 levels of 8 times enlargement. 1.

  • Page 42: Slideshow Display

    Slideshow Display The slide show function enables you to play your images back automatically in sequential order. This is very useful and entertaining feature for reviewing recorded images and for presentations. 1. Press the MODE button to access in [ , , or , then press the OK button.

  • Page 43: Movie Mode

    MOVIE MODE Recording Video Clips 1. Press the button to turn on the power. 2. Press the MODE button to access in [ , , or , then press the OK button. 3. Press the shutter button to start recording. 4.

  • Page 44: Playing Back Video Clips

    Playing Back Video Clips 1. Press the MODE button to access in [ , , or , then press the OK button. 2. In the [ (PLAY)] mode, use until the video clip you want to play back is displayed. To view the previous image, press the To view the next image, press the 3.

  • Page 45: Play Mode - Advanced Functions

    You can also playback your images on a TV screen. Before connecting to any device, make sure to select NTSC/PAL system to match the video output system of the video equipment you are going to connect to Vivicam 5340s, then turn all connected devices off. 1. Position Vivicam 5340s on the cradle.

  • Page 46: Rotating Images In The Display

    Rotating Images in the Display This function lets you rotate images so that the images are played back with the correct orientation. You can rotate an image 90 degree clockwise or counterclockwise. 1. Press the MODE button to access in [ 2.

  • Page 47: Deleting Images/Video Clips

    Deleting Images/Video Clips Use this function to delete one or all images/video clips stored in the internal memory or memory card. Please note that the deleted images or video clips cannot be recovered. Exercise caution before deleting a file. To delete a single image/video clip 1.

  • Page 48: Protecting Images/Video Clips

    Protecting Images/Video Clips Set the data to read-only to prevent images from being erased by mistake. 1. Press the MODE button to access in [ , , or , then press the OK button. 2. In the [ (PLAY)] mode, press , , or button, then press the OK button.

  • Page 49: Changing The Camera Startup Logo

    [EXECUTE], then press the OK button to confirm. The new logo will be activated on the next time you turn on Vivicam 5340s. button to turn on Vivicam 5340s. (PLAY)] mode with to access in [PLAY] menu. 7/ 7...

  • Page 50: Audio Mode

    AUDIO MODE Vivicam 5340s enables you to record and playback voice files anytime and anywhere. Recording Voice Files 1. Press the button to turn on Vivicam 5340s. 2. Press the MODE button to access in [ , , or , then press the OK button.

  • Page 51: Deleting A Voice Recording File

    [YES], Press Functional Description Press the button to turn on/off Vivicam 5340s. Shutter Press the shutter button to start or stop voice recording. button to choose previous or next voice- voice-recording filerecording file and then press the OK button to play.

  • Page 52: Transferring Files From Your Vivicam 5340S To Your Computer

    TRANSFERRING FILES FROM YOUR VIVICAM 5340S TO YOUR COMPUTER After using USB cable to establish a USB connection between Vivicam 5340s and your computer, you can use your computer to share recorded images/video clips/voice-recording files with your family or friends via a e-mail or post them on the Web. In order to do this, you must install the USB driver onto your computer first.

  • Page 53: Step 1: Install The Usb Driver (Windows 98/98Se Users Only)

    Follow the on-screen instructions to complete the installation. 3. After the USB driver has been installed, restart your computer. Installation on MAC OS X For Mac OS X, the computer will automatically recognize Vivicam 5340s and load its own USB drivers. EN-53...

  • Page 54: Step 2: Connect Vivicam 5340S To Your Computer

    (For Mac users, double-click [untitled] or [unlabeled] disk drive icon on our desktop.) When connecting to the computer, it is necessary to install the battery into Vivicam 5340s. While transferring images to your computer, the other buttons on Vivicam 5340s will not perform the functions. EN-54...

  • Page 55: Step 3: Download Images, Video Clips Or Voice-Recording Files

    Step 3: Download images, video clips or voice-recording files When Vivicam 5340s is turned on and connected to your computer, it is considered to be a disk drive, just like a floppy disk or CD. You can download (transfer) images by copying them from the “Removable disk”...

  • Page 56: Editing Software Installation

    EDITING SOFTWARE INSTALLATION Installing Photo Explorer ® Ulead Photo Explorer provides a simple and efficient way to transfer, browse, modify and distribute digital media. Acquire photos, video or sound clips from various digital device types and easily browse or add personal descriptions; make timely modifications; or distribute the media through the medium of your choice: E-mail, Print, Slideshow Presentations.

  • Page 57: Installing Photo Express

    Installing Photo Express Ulead ® Photo Express is complete photo project software for digital images. The step-by-step workflow, visual program interface, and in-program help assist users in creating exciting photo projects. Acquire digital photos effortlessly from digital cameras or scanners. Organize them conveniently with the Visual Browse mode.

  • Page 58: Install User's Manual

    User Manual on the CD-ROM is that you have Acrobat Reader (Adobe Reader) installed on your computer. Updates to this manual, and versions in other languages may be found on the Vivitar website (www.vivitar.com). 1. Insert the CD-ROM that came with the camera into the CD-ROM drive.

  • Page 59: Install Acrobat Reader

    INSTALL ACROBAT READER The CD-ROM includes a PDF (portable document format) copy of the user’s manual. To view a PDF you must have Acrobat Reader installed in your computer. Acrobat Reader is included on the camera CD ROM. Using Acrobat Reader, you can read the user’s manual and print sections of interest. 1.

  • Page 60: Menu Options

    MENU OPTIONS Camera Menu This menu is for the basic settings to be used when capturing still images in camera mode. PICTURE FUNCTION AE/AWB SELECT MODE: SELECT PAGE: EXIT: SELECT ITEM: 1. Press the MODE button to access in [ button.
  • Page 61 PICTURE Settings Option Functional Description SIZE Sets the size of the image that will be captured. 2560 x 1920 2048 x 1536 1280 x 960 640 x 480 TIFF IMAGE QUALITY Sets the quality (compression rate) at which the image is captured. SUPER FINE FINE NORMAL...
  • Page 62 FUNCTION Settings Item Functional Description CAPTURE MODE Sets the recording method at the time of capturing images. LCD BRIGHT Sets whether or not to use digital zoom at the time of photography. The adjustment range is from –5 to +5. DIGITAL ZOOM Sets whether or not to use digital zoom at the time of photography.
  • Page 63 AE/AWB Settings Item Functional Description WHITE BALANCE Sets the white balance photographing under a variety of lighting conditions and permits images to be taken that approach the conditions that are seen by the human eye. * AUTO AUTO DAYLIGHT CLOUDY SUNSET TUNGSTEN FLUORESCENT...

  • Page 64: Movie Menu

    Movie Menu This menu is for the basic settings to be used when recording video clips. 1. Press the MODE button to access in [ , , or , then press the OK button. 2. Press to access in [MOVIE] menu. 3.

  • Page 65: Play Menu

    Play Menu In the [PLAY] menu, set which settings are to be used for playback. 1/ 8 PLAY SLIDE SHOW COPY Index 3SEC SLIDE SHOW EXIT: SELECT ITEM: ENTRY: 1. Press the MODE button to access in [ 2. Press to access in [PLAY] menu.
  • Page 66 Item Functional Description COPY TO CARD Allows you to copy your files from Vivicam 5340s’ internal memory to a memory card. Of course, you can only do this if you have a memory card installed and some COPY files in internal memory.

  • Page 67: Setup Menu

    Setup Menu You can select your preferences on the camera settings in the mode. BASIC CUSTOM FORMAT AUTO AUTO DATE SELECT MODE: SELECT PAGE: SELECT ITEM: 1. Press the MODE button to access in [ The [SETUP] menu is displayed. 2.
  • Page 68 Returns all basic settings to Vivicam 5340s’ default settings. The time setting will not be reset. * YES/NO POWER OFF If no operation is performed for a specific period of time, the power to Vivicam 5340s is automatically turned off. This feature is useful to reduce battery wear. AUTO * OFF / 3MIN.
  • Page 69 ESPAÑOL VIDEO OUT Sets video output system of the video equipment that you are going to connect to Vivicam 5340s. NTSC *PAL / NTSC VERSION Displays the firmware version of Vivicam 5340s. / FRANÇAIS / DEUTSCH / ITALIANO / EN-69...

  • Page 70: Connecting Your Camera To Other Devices

    CONNECTING YOUR CAMERA TO OTHER DEVICES EN-70...

  • Page 71: Vivicam 5340S Specifications

    VIVICAM 5340S SPECIFICATIONS Item Resolution 5 Mega Pixels Still image resolution Video clip resolution Still image quality settings Internal memory 10 MB External memory Secure Digital (SD) memory card (optional, up to 512MB) Compression formats MPEG 4 SP (Video), IMA-ADPCM (Audio)

  • Page 72: Appendix

    * The AC power adapter (optional) * [SLEEP] in BASIC menu of SETUP Vivicam 5340s suddenly powers down. * The battery has run out. * Vivicam 5340s is in PLAY mode. Image is not captured * Memory is full. when the shutter button is pressed.
  • Page 73 Possible Number of Recordable Images The frame counter indicates the approximate number of images that can be stored on the SD memory card. The number of recordable images may vary depending on the recorded subject, the capacity of the memory card, there are files other than images or when the recording is made while switching the picture quality or resolution.
  • Page 74 Approximate Duration of Recording Time The table below indicates the approximate duration of recording time depending on the capacity of the SD memory card. Image size 640 x 480 0:18 320 x 240 1:13 The values for the recording time may vary depending on the shooting conditions and settings. EN-74 SD memory card 16MB...

Table of Contents