Utilitech 7131-04 Manual page 12

CARE AND CLEANING (Continued)
1. Remove the grille (B) by squeezing the mounting springs
and pulling the grille (B) down from the fan housing (A).
Wipe grille (B) with a damp cloth.
2. Remove dust and dirt from the fan housing (A) with a
vacuum cleaner. Carefully remove dust from around the
humidity sensor control. Longtime operation will influence
the precision of the humidity sensor as dust accumulates.
3. Wipe the fan housing (A) with a damp cloth and wipe dry.
4. Attach the grille (B) by pinching the mounting springs and
inserting them into the narrow rectangular slots in the fan
housing (A).
Turn on power source.
1
Housing
slots
Mounting
springs
B
2
3
4
Housing
slots
Mounting
springs
B
12 12
A
A
A
A