Kin AOD User Manual page 4

AOD
GB
1. Safety Measures
Before starting the pump, read this instruction manual carefully and keep it
in a safe place for future reference. The pump must only be used for the
purpose for which it was designed.
The power cord and floating switch (if present) must never be used to carry
or move the pump. Always use the pump's handle, for submersible pumps
attach a cord or rope to the pump's handle.
When handling the pump, while it is connected to the electric power supply,
you should avoid all contact with water.
Never remove the plug by pulling on the power cord.
Before taking any action on the pump, always remove the plug from the
power socket.
If the power supply cord has been damaged, it must be replaced by the
manufacturer or its authorized customer support service in order to avoid all
risks.
The 230v pumps are equipped with a thermal overload safety device. In the
event of any overheating of the motor, this device automatically switches off
the pump. The cooling time is roughly 15 to 20 minutes, then the pump
automatically comes on again. If the overload cutout is tripped, it is essential
to identify and deal with the cause of the overheating. See chapter 5:
Troubleshooting.
It's not allowed to use the pump in tanks or swimming pools while people
are in the water.
4
kinpumps.com