HP 3000 Manual page 297

CAUSE The upper left row and column numbers used to define the help area must be less than or
equal to the lower right row and column numbers, and they are not.
ACTION Reenter the row and column numbers, making sure that they are correct in relation to each
other.
-----------------------------------------------------------------------------
MESSAGE UPPER LEFT MUST BE DEFINED FIRST. (SIGERR 075)
CAUSE An attempt was made to select the lower right corner of the help area before the upper left
corner was selected.
ACTION Select the upper left corner first, then the lower right corner.
-----------------------------------------------------------------------------
MESSAGE UPPER LEFT AND/OR LOWER RIGHT CORNER NOT DEFINED. (SIGERR 076)
CAUSE An attempt was made to set the attributes for a help area before both corners were selected.
ACTION First select the upper left corner of the help area, then select the lower right corner of the
help area, then select the help area attributes.
-----------------------------------------------------------------------------
MESSAGE MAXIMUM NUMBER OF HELP AREAS (256) ALREADY EXIST. (SIGERR 077)
CAUSE The maximum number of help areas have already been defined for this form.
ACTION You must delete some help areas before any more can be defined for this form. Perhaps sev-
eral help areas can be combined into one larger help area.
-----------------------------------------------------------------------------
MESSAGE UPPER LEFT ROW CANNOT BE LESS THAN START LINE. (SIGERR 078)
CAUSE A help area must start at or below the starting line of the application form.
ACTION Redefine the corners of the help area so that the help area location is correct in relation to the
starting line number of the application form.
A- 299