Download Print this page

HP 3000 Manual page 254

Mpe/ix computer systems, rpg/xl utilities
Hide thumbs Also See for 3000:

Advertisement

|
e
|
a
|
|
|
|
NAME ________________________________________
|
ADDRESS _____________________________________
|
ADDRESS _____________________________________
|
ZIP CODE ___________ PHONE NO. ________
|
|
|
|
d
|
h
_______________________________________________________________________
Figure 1-13.
Set the horizontal line type to bold by pressing the f3 key until the key on the screen reads 'HORIZON
BOLD.'
Next, move the cursor with the cursor control keys to approximately the same position on the screen that
the letter b appears in Figure 1-13. Press the f2 key (TO POSITION) to draw the bold line on the screen.
Press the f1 key again, but this time set the vertical line type to double by pressing the f4 key until the
key reads 'VERTICAL DOUBLE.' Move the cursor to the same position as the letter c and press the f2
key; a double line appears.
Repeat the process above, drawing a bold line across the bottom of the screen (from c to d) and a double line
up the side (from d to a). Now set both line types to 'SINGLE' and draw another box around the form in
the position of the letters e, f, g, and h in Figure 1-13.
SIGEDITOR automatically places appropriate connectors on the form. Chapter 2 describes how to specify
connectors manually.
The f5 key (ERASE) initiates the erase function to erase part or all of a line within a form. Press the f5
key to turn erase on. Notice that the set of function keys at the bottom of the screen changes. These are
the erase keys. To erase the lines on the side of the form, move the cursor to the upper right corner of the
inside box on the screen and press f1 . Move the cursor to the lower right corner and press f2 . The line
between the two endpoints just defined is erased. Repeat this process with the vertical line on the left side
of the inside box.
Press ENTER . The name of the form is displayed in the next screen.
Press ENTER to save the changes and return to the main menu.
1- 256
SOC. SEC. NO. ___________________
OFFICE PHONE __________
Location of Lines Drawn on Sample Form
f|
b
|
|
|
|
|
|
|
|
|
|
|
c
|
g|

Advertisement

loading