HP 3000 Manual page 279
Mpe/ix computer systems, rpg/xl utilities
Hide thumbs
Also See for 3000:
- Limited warranty (17 pages) ,
- Diagnostic manual (10 pages) ,
- Installation manual (39 pages)
Advertisement
Creating a Field in an Existing Form
1
From the main menu, press f1 (SELECT FRMS FIL) to open a forms file.
2
Enter a valid forms filename and press ENTER .
3
Enter a valid form name and press f1 (EDIT FORM).
4
Position the cursor where the field is to begin.
5
Press f1 (CREATE FIELD) to create a new field.
6
Position the cursor where the field is to end.
7
Press f2 (STOP FIELD) to end the field.
8
Press ENTER .
9
Press ENTER again to save the form, or press f7 to abandon changes.
10 Press f8 to return to the main menu.
Deleting a Field
1
Press f1 (SELECT FRMS FIL) from the main menu.
2
Enter a valid forms filename and press ENTER .
3
Enter a valid form name and press f1 (EDIT FORM).
4
Press f8 (SWITCH MENU) to change menus.
5
Position the cursor in the field to be deleted.
6
Press f3 (DELETE FIELD).
7
Press ENTER
8
Press ENTER again to save the form, or press f7 to abandon changes.
9
Press f8 to return to the main menu.
Deleting a Form from a Forms File
1
From the main menu, press f1 (SELECT FRMS FIL) to open a forms file.
2
Enter a valid forms filename and press ENTER .
3
Press f7 (FORM UTILS).
4
Press f3 (DELETE FORM).
5
Enter the name of the form and press ENTER .
6
Press f8 to return to the form utilities menu.
7
Press f8 to return to the edit menu.
8
Press f8 to return to the main menu.
Drawing Lines on a Form
1
From the main menu, press f1 (SELECT FRMS FIL) to open a forms file.
2
Enter a valid forms filename and press ENTER .
3
Enter a valid form name and press f1 (EDIT FORM).
4
Press f8 (SWITCH MENU) twice to display the line drawing menu.
5
Press f3 (HORIZON SINGLE) or (VERTICAL SINGLE) to set the correct line type.
6
Position the cursor at the line's starting position.
4- 281
Advertisement
