Light Frequency; Factory Setup - Vivitar Vivicam 3750 User Manual

LIGHT FREQUENCY

This ViviCam 3750 supports different lighting frequencies: 50Hz and 60Hz. When
photographing under fluorescent lighting, select the correct frequency setting depending
on your local area's voltage. This function is only effective if you set the White Balance
to or (Fluorescent) setting.
Select [50HZ] or [60HZ] by using the / button.

FACTORY SETUP

If you wish to restore all camera settings to their original status, select [SETUP] by using
the / button and then press the OK button.
The FACTORY SETUP menu appears on the screen.
Select [YES] by using the / button and then press
the OK button.
EN-48