Getting Started; Installing Batteries - Vivitar Vivicam 3750 User Manual

GETTING STARTED

You can use 2 AA size batteries (Alkaline, Ni-MH) to power the camera.

Installing Batteries

1. Make sure the camera is turned off.
2. Slide the battery/memory card cover in the direction of the [OPEN] arrow.
3. Insert the batteries, noting correct polarity (+ and -).
4. Close the battery/memory card cover firmly.
Note:
If you will not be using the batteries for an extended period of time, remove them from the
camera to prevent leakage or corrosion.
Never use manganese batteries.
Never use batteries of different types (together) or mix old and new batteries.
Avoid using batteries in extremely cold environments as low temperatures can shorten the
battery life and reduce camera performance.
When the icon appears on the LCD monitor, the LED indicator will blink for 5 seconds and then
the camera will automatically power off. Replace the exhausted batteries with a new set of
batteries.
EN-14