digital camera
user's manual
1. Follow steps 1 through 3 in LCD BRIGHTNESS section.
2. Use the arrow button
3. Use the arrow button
USB CONFIGURATION
This menu contains two modes, including DISK DRIVE and PC CAMERA
DISK DRIVE: This mode allows to transfer pictures to PC.
PC CAMERA: This mode allows to use netmeeting/video conference.
1. Follow steps 1 through 3 in LCD BRIGHTNESS section.
2. Use the arrow button
3. Use the arrow button
AUTO POWER OFF
You may specify or cancel a power-off time.
1. Follow steps 1 through 3 in LCD BRIGHTNESS section.
2. Use the arrow button
3. Use the arrow button
OK to confirm.
LIGHT FREQUENCY
The camera supports different lighting frequencies: 50Hz and 60Hz.
Select the correct frequency setting for your region.
1. Follow steps 1 through 3 in LCD BRIGHTNESS section.
2. Use the arrow button
3. Use the arrow button
Note: Before taking pictures, preview the image with both 50Hz and 60Hz and compare
the results.
PC Mode
Pictures can only be transferred to a PC via USB in this mode. There are no menus associated
with this mode, and no buttons are active in this mode.
24
to highlight VIDEO MODE, press OK.
again to select NTSC/PAL, press OK to confirm.
to highlight USB CONFIG, press OK.
again to select DISK DRIVE/ PC CAMERA, press OK to confirm.
to highlight AUTO POWER OFF, press OK.
again to select the desired setting, press
to highlight LIGHT FREQUENCY, press OK.
again to select the desired setting, press OK to confirm.
USB CONFIG
DISK DRIVE
PC CAMERA
LIGHT FREQUENCY
50Hz
60Hz