Table of Contents
Advertisement
* Be sure to Power-Off your camera before connecting or disconnect
ing the adaptor.
* The AC adaptor may become warm to the touch after extended
periods of use.
This is normal and is not cause for alarm.
Auto Power-Off
In case no buttons or switches are pressed for a certain period of
time, the camera turns off automatically after the following period.
Press POWER button to turn on the camera again.
Equipping the Compact Flash Card
1. Insert the CompactFlash Card into the slot in the direction of the
arrow by pushing it until it is firmly combined. (Fig.5-1)
2. To remove the CompactFlash Card, pushing the CompactFlash
Ejector as shown. (Fig.5-2)
3. If the camera is powered-on without the card or with a unknown
care, the "NO CARD" message appears on the LCD monitor.
Notes:
* Always keep Power-Off while equipping or removing the
CompactFlash Card, or it may be damaged.
* All images are stored on a CompactFlash card inserted in the cam-
era with the capacity up to 48MB. The camera does not have any
resident memory for the image storage. The total number of stored
images is varied with the free space of the card, the mixture of the
image quality modes, and also the complexity of the subject. The
following are examples of the reference number to be displayed on
the LCD monitor in the Recording mode after the camera formats the
card.
Image Quality 4 MB 8 MB
Fine
Normal
Economy
Power source
Battery
AC adapter
10
20
20
40
35
70
Inactivity period
2 min.
30 min.
16 MB
32 MB 48 MB
40
80
80
160
140
280
120
240
420
9
Hide quick links:
Advertisement
Table of Contents
