Powering The Camera On/Off; Powering The Camera On; Powering The Camera Off; Auto Off - Power Saving - Vivitar VT426 User Manual

Powering the Camera On/Off

 Make sure the batteries have been inserted properly into your digital camera.
 Make sure the Micro SD card has been inserted properly into your digital camera.
(Micro SD card up to 32GB - not included)
Please see Initial Camera Setup

POWERING THE CAMERA ON

Press the Power button to turn your camera ON.
 After powering on, the camera emits a beep sound and the LED light turns on briefly.
 The LCD screen turns on with your camera in Photo Capture Mode.

POWERING THE CAMERA OFF

While the camera is on, you can press the
any point to turn your camera OFF.
AUTO OFF – POWER SAVING
Your digital camera also has an Auto Power Off feature that will automatically turn off your
camera after a specific period of time that your camera is left idle. The Auto Power Off settings
can be set from the 'Auto Power Off' settings menu accessed from the general Camera Settings
menu while in Photo Capture Mode or Video Capture Mode.
for more information.
Power button down again for a few seconds at
12