Creating A Disc With A Recorder, Etc - Sony Handycam DCR-SR47 Operating Manual

Creating a disc with a
recorder, etc.
Input
VIDEO
~
c::R:IIID::lDDo.....
(Yellow)
(White)
I~
AUDIO
l.aIl
f fi _ _-
(Red)
S VIDEO
to
,.'
(Yellow)
AN Remote
Connector
=:::::::.::.", Signal flow
2
Connect your camcorder to the
recording device (a disc recorder,
etc.) with the AN con necti ng
cable
II]
(supplied) or an AN
connecting cable with 5 VIDEO
[2J
(sold separately).
1
Insert the recording media in the
recording device.
• If your recording device has an input
selector, set it to the input mode.
You can dub images played back on your
camcorder to a disc or video cassette,
by connecting your camcorder to a disc
recorder, a Sony DVD writer other than
DVDirect Express, ect., with the A/V
connecting cable. Connect the device
in either way of
rn
or
[gJ.
Refer also to
the instruction manuals supplied with
the devices to be connected. Select the
recording media that contains movies you
want to dub before starting the operation
(p.38).
• Connect your camcorder to the wall outlet (wall
socket) using the supplied AC Adaptor for this
operation (p.
14).
rn
AN connecting cable (Supplied)
Connect the A/V connecting cable to the
input jacks of another device.
[2]
AN connecting cable with SVIDEO (sold
separately)
When connecting to another device
via the 5 VIDEO jack, by using an A/V
connecting cable with an 5 VIDEO cable
(sold separately), higher quality images can
be produced than with an A/V connecting
cable. Connect the white and red plug
(left/right audio) and the 5 VIDEO plug
(5 VIDEO channel) of the A/V connecting
cable with an 5 VIDEO cable. If you
connect the 5 VIDEO plug only, you will
hear no sound. The yellow plug (video)
connection is not necessary.
• Connect your camcorder to the input jacks
of the recording device.
us
35