Getting Started - Vivitar Vivicam 3315 User Manual

Getting Started

Power - Inserting Batteries
1. Slide the battery cover in the direction indicated by the arrow
on the battery cover door
2. Insert two AA batteries with the polarity as shown:
(Note also the decal inside the battery compartment)
3. Close the battery cover
Do not mix battery types (use only one battery type at a time) as this may cause poor
camera performance, fire, or explosion
Batteries must be placed in the battery compartment with correct polarity
Batteries should be replaced when the battery indicator displays the "empty" icon
To improve battery performance, replace both batteries at the same time
Do not drop, puncture, or disassemble batteries and keep batteries away from heat
Remove the batteries if they will not be used for an extended period of time
IMPORTANT
Please observe the following precautions as these may cause the battery to split or leak:
Do not attempt to charge an alkaline battery
Do not carry or store a battery with objects such as metal pens, necklaces, coins, or
hairpins as this could short circuit the positive + and negative - terminals of a battery
Do not subject batteries to strong mechanical shock or impact, such as hitting them
with a hammer, stepping on them, or dropping them
Using an AC Power Adapter (Optional accessory)
1. Open the i/o port cover as shown:
2. Connect one end of the power adapter to the port labelled
"DC in 3V" as illustrated:
3. Plug the other end of the power adapter into a power outlet
(A power supply must provide 3.3 VDC rated at 2.5 A for proper camera operation)
(An AC adapter is an optional accessory and is not usually included with the camera)
Use only the specified batteries or AC power adapter with this
camera, the use of other power sources may cause a fire, or damage the camera
9