DPOF (Digital Print Order Format)
The V3315 supports the DPOF system. To use DPOF, you must use an SD memory card, as DPOF
information can only be stored on a memory card. Using DPOF, all your images and DPOF settings
will be saved on the SD memory card for printing on a DPOF enabled printer.
DPOF User Interface
1. Press the Mode button to Still-Image PLAY mode:
2. Use the arrow buttons
DPOF print specification
3. Press the Menu button, the PLAY MENU appears
4. Use the arrow buttons:
5. The DPOF Sub-menu will be shown with three selections:
PRINT QUANTITY, PRINT SIZE, and ENABLE.
Use arrow buttons
PRINT QUANTITY -
* Use the arrow buttons:
* Press OK to confirm and return to the DPOF Sub-menu
PRINT SIZE -
* Use the arrow buttons:
* You can specify PRINT STD, 3X5, 4X6, 5X7, 8x10 (inches)
* Press OK to confirm and return to the DPOF Sub-menu
If your printer only supports DPOF version 1.0, you
must set PRINT STD for the "PRINT SIZE"
ENABLE -
* Use the arrow buttons:
* If you select "ENABLE" and press OK, the camera will save the settings and
return to the Still-Image PLAY MENU
* If you select "DISABLE" and press OK, the camera will discard this image's DPOF setting
and return to the Still-Image PLAY MENU
to select an image for
to select DPOF, then OK
to select one of the items, press OK
to specify quantity from 1 to 9
to specify size
to toggle ENABLE or DISABLE
DPOF
PRINT QUANTITY
PRINT SIZE
ENABLE
PRINT QUANTITY
0
PRINT SIZE
PRINT STD
3
5
X
4
6
X
5
7
X
8
10
X
19