Camera Modes And Menus; Mode Button And The Status Information Lcd Display; Record Mode - Vivitar Vivicam 3315 User Manual

Camera Modes and Menus

Mode Button and Information Status LCD Display
Each press of the mode button switches the status LCD display as follows:
Record Still Image, Record Video (Movie), Still Image Playback , Video/Movie Playback

Record Mode

Press the Mode button to select the RECORD mode:
Record Menu
Press the MENU button while in Record Mode
- the RECORD MENU appears:
The RECORD MENU contains the following items:
SETUP
For more details, refer to SETUP MENU on page 20
QUICKVIEW
If Quickview is enabled, each image will be displayed on the LCD momentarily after it is captured. If
disabled, each image will not be displayed immediately after capture. You may Toggle Quickview
ON/OFF using the QUICKVIEW menu:
1. Use the arrow buttons:
The Quickview preference is retained when the camera is powered off
WHITE BALANCE
Automatic white balance is recommended for most cases. For
particular circumstances, you may manually select another
white balance preset - according to the ambient lighting conditions.
Select from: Automatic, Tungsten, Fluorescent, Shade, or Sun.
Use the arrow buttons:
Press the OK button again to confirm and return to the Record Menu. See also page 15.
to select On or OFF, press OK to confirm
to select the desired white balance.
RECORD MENU
SETUP
QUICKVIEW
WHITE BALANCE
EV COMPENSATION
WHITEBALANCE
AUTO
TUNGSTEN
FLUORSCENT
SHADE
SUN
17