Table of Contents
Advertisement
digital camera
user's manual
Still Image Playback
1. Power on the camera
2. Press the Mode button to select the Still-Image Play Mode as
indicated by arrows pointing at both Play
3. The last recorded image appears
4. Use the arrow buttons
To Playback Images on a TV
1. Set the appropriate Video output (NTSC/PAL) corresponding to your TV standard
2. Connect one end of the video cable to the "VIDEO OUT" port of your camera
3. Connect the other end of the cable to a VIDEO IN port of your television or monitor
4. Turn on the camera and TV
5. Press the Mode button to select the Play Mode, as described above
6. Use the arrow buttons
Video Playback
1. Power on the camera
2. Press the Mode button to select the Movie Play Mode as
indicated by arrows pointing at both the Play
3. The last recorded video appears
4. Use the arrow button to scroll forward/backward through the recorded videos
5. Press shutter button once to start a video playback
6. To pause/resume the playback, press shutter button once again
Erasing Still Images
There are two ways to erase (delete) images:
* Erase One
* Erase All
Note -
* Images recorded images on a memory card cannot be erased if it is write-protected
* To erase images on an SD card, make sure to insert the card before deletion
* To erase images recorded in the cameras internal memory, do not insert an SD card
* External memory (SD card) always has priority over internal memory - whenever a memory card
is inserted into the camera the camera will use the memory card for both capture and playback
12
and Record
to scroll forward/backward through the recorded images
to scroll forward/backward through the recorded images
and Movie
icons:
icons:
ERASE MENU
ERASE ONE
ERASE ALL
Hide quick links:
Advertisement
Table of Contents
