Advertisement
[Overview]
UNOKIT is the official calibration tool for the UNO Sensor (multi-in-one air quality detector)
devices. It allows for the calibration of sensor module readings on the test UNO Sensor device
by comparing them with the readings of the UNO Sensor benchmark, ensuring the accuracy
of the sensor readings.
The UNOKIT supports the following models of UNO Sensor devices: UNOnext series and
UNOlite series. The sensor modules can be calibrated are listed.
Carbon Dioxide (CO2)
⚫
Particulate Matter (PM1/PM2.5/PM10)
⚫
Total Volatile Organic Compounds (TVOC)
⚫
Carbon Monoxide (CO)
⚫
Formaldehyde (HCHO)
⚫
* The calibration of the test device will be performed based on the sensor combination of the benchmark, typically
UNO-9SW, which includes carbon dioxide (CO2), particulate matter (PM2.5/PM10), total volatile organic
compounds (TVOC), carbon monoxide (CO), and suspended, formaldehyde (HCHO).
* After calibration, sensor readings of the test device will be within the valid range of sensor readings of the
benchmark but may not be identical totally.
2
Advertisement
