Advertisement
[Common Errors]
Error
alert_check_fail
alert_cmd_fail
alert_dut_decline
alert_dut_err
fatal_alert_bad_env
fatal_alert_bench_err
fatal_alert_bench_offline
fatal_alert_disk_full
fatal_alert_dut_changed
fatal_alert_dut_offline
fatal_alert_modbus_fail
fatal_alert_no_bench
fatal_alert_no_dut
fatal_alert_no_target
fatal_alert_unknown_dut
fatal_alert_bench_invalid_fw
fatal_alert_dut_invalid_fw
Description
Calibrate fail, please re-calibrate
Unknown failure, please re-calibrate
Sensor offset is too large, reset or replace it
Sensor error, reboot or replace it
Bad environment for calibration, change place and then recalibrate
Benchmark sensor error, please reboot or replace Benchmark
Benchmark is offline, please re-connect and reset
Disk is full, please delete extra reports
Tested device is changed, please reset
Tested device is offline, please re-connect and reset
COM port error, try to reboot UNOkit
Benchmark not detected (0xDO)
Tested device not detected
No target item
Unknown Test device (SN, Model, Ver)
Please update the benchmark firmware
Please update the test device firmware
14
Advertisement
