Installation
①
Make the wire connection in accordance to the wiring diagram provided.
②
Put the receiver into the bracket and tidy up wires. Rotate the canopy counter-clockwise until
screw heads engage the key slots fully. Tighten the screws. Be careful not to damage or cut the
wiring.
①
Align the connected blade with the mounting hole, and then fix it with screws.
Step 3 (Receiver and wiring installation)
Black
AC IN L(
)
White
AC IN N(
)
To Light
To Motor
Step 4 (Install remaining parts)
Visit www.pmwfan.com
House power
Ground wire
.8.
for further assistance.