Step 2 (Receiver And Wiring Installation) - YUHAO 1073L Installation Instructions Manual

Installation
Step 2 (Wiring and fan into the installed Bracket.)
①
Connect the wires according to the polarity (the color of the House power cord may be
different if the color is the same).
Put the receiver into the Bracket and
②
arrange the wires
House power wire
Visit www.pmwfan.com
Intput wire
For light
To motor
Output Wire
Remove two separated pre-lock
③
screws from Bracket, and loosen the
other two (no need to take them out)
.7.
for further assistance.
take out