Fluke VIBXPERT 3 Getting Started page 12

# Part
1 ON/OFF button
2
Channel 6
3
Channel 5
4 Channel 4
5
Trigger point 2
6 Trigger point 1
7
Channel 3
8 Channel 2
9 Channel 1
10 USB type C port
11 Charging socket
12 Stand
Note: When a triaxial sensor is connected, then the two analog input channels
next to the occupied channel cannot be used.
Function
Switch device ON and OFF; activate/deactivate sleep mode
Analog input— connection for sensor
Analog input — connection for sensor
Analog input — connection for triaxial sensor or VIBCODE
sensor
Connection for sensor to measure rotational speed or
trigger signal
Connection for sensor to measure rotational speed or
trigger signal
Analog input— connection for sensor
Analog input— connection for sensor
Analog input — connection for triaxial sensor or VIBCODE
sensor
Communication interface to a PC
Connection for charger
Retractable stand to hold device in different positions
9
Interfaces