Nikon ECLIPSE E400 Instructions Manual page 21

© Connecting the power cord
ANT
Use only the following power supply cord set.
© For 100-120V area
UL Listed, detachable cord set, 3 conductor grounding type SVT, No. 18 AWG rated at 125V, 7A minimum.
In case of using the extension cord, use only the power supply cord with the PE (protective earth) wire.
© For 220-240V area
3 pole power supply cord set, which must be approved according to EU/EN standards.
Class I equipment should be connected to PE (protective earth) terminal.
In case of using the extension cord, use only the power supply cord with the PE (protective earth) wire.
Turn off the microscope power switch by flipping it to the " " side before connecting the power cord.
After plugging the socket onto the AC input connector on the back of the microscope, securely insert the plug into an AC
outlet.
Oo Separately sold accessories installation
Install photomicrographic eguipment and other separately sold accessories by referring to the instruction manual for each
accessory.