To Clear The Edited Contents - Kenwood DP-2060 Instruction Manual

Play/Pause key (D-/i)
PROGRAM MODE key Open/Close key ([&])
CHECK key
Hi To check the edited contents M To clear the edited contents
Clearing all edited contents
: Press either of these keys.
indicator lights up.
PROGRAM
MODE
Track No,
@ Every time the key is pressed, the track Nos. are displayed in the
edited order.
H To play an edited program @ Activating EDIT SHUFFLE
When the |EDIT| key is pressed again after the
editing has been completed, "SHUFFLE" will ap-
pear on the display, and the change of track Nos.
is done only once so that the remaining time of A
and B files is minimized.
EQIT When the [EDIT] key is pressed again
Gy shire
| 72 Dre
@ The tunes in the file A are played in sequence and the player
enters pause mode at the beginning of the file B. Bungie lendinection
@ The EDIT SHUFFLE function cannot be activated without the
correct time input.
@ To play the tunes in the file B, press the key again.
Notes: = .
1. While you can edit with a different time setting to that of the tape you are using, part of the tape may be left with nothing recorded on it, or the
last track on side A or side B may be cut short. ;
2. Up to a maximum of 20 tracks can be edited using this function.
3. The EDIT function may not operate properly for discs having only one track or having tracks of long duration such as classical music.
DP-2060/DP-1060 fen) 15