Table of Contents
Advertisement
The following is an example of an installation that uses the screw holes in the TV and a TV stand.
1.
Attach the monitor mounting bracket (vertical), monitor mounting bracket (for mounting
onto wall mounting bracket) and the wall mounting bracket using the screws included with
them.
2.
Using the included screws, attach the monitor mounting brackets (horizontal) and the
brackets assembled in step
Align the monitor mounting brackets (horizontal) with the screw holes in the TV to determine the mounting position.
After determining the mounting position, mount the brackets from step
IMPORTANT
At this point, do not install the TV yet.
Monitor mounting
bracket (vertical)
The edge with the notch
should be on top
Wall mounting
bracket
Monitor mounting
1
.
TV
(back)
Monitor mounting bracket (horizontal)
bracket
1
CS-800 User Guide
23
Setup and connections
[Included with monitor mounting bracket]
Screw for bracket assembly
(M4 × 10 mm with washer) × 8
at the appropriate height.
[Included with monitor mounting bracket]
Screw for bracket assembly
(M4 × 10 mm with washer) × 4
Advertisement
Table of Contents
