Setup And Connections; Installing The Device; When Installing On A Tv - Yamaha CS-500 User Manual

Setup and connections

Installing the device

 When installing on a TV
This device can be placed directly on top of a TV.
1.
Flip open the stand on the bottom of the device, and then hook it on the top of the TV.
2.
Adjust the camera orientation (up or down) by changing the camera's angle to the stand.
NOTE
When installing this device in the following situations, use the brackets to mount it to a TV. (Page 14)
• When installing more than 2 meters from the ground.
• When the TV thickness is 51 mm or more.
• When the stand of this device must be opened more than 90 degrees to place it on a TV.
• When the bottom of this device and the rubber part of the stand are not in close contact with the TV.
• When a stable installation of this device is not possible.
CAUTION
Stand
• When installing on a TV, make sure that the device is no more than 2 meters from the ground.
When installing the device at a location more than 2 meters from the ground, be sure to use a
bracket to secure it to the TV. (Page 14)
• If the device falls, injuries or damage may result.
TV
(back)
CS-500 User Guide
13
CS-500