When Mounting On A Wall - Yamaha CS-500 User Manual

 When mounting on a wall
This device can be mounted to a wall by using the wall mounting bracket (sold separately).
When mounting the device to a wall, prepare the following.
1 Wall mounting bracket BRK-WL1 (sold separately)
• Wall mounting bracket
• Device fixing screw (1/4 inch) for wall mounting bracket
2 Wall-mounting screws (user provided)
3 Screwdriver (user provided)
WARNING
1.
Attach the wall mounting bracket to the wall.
IMPORTANT
2.
Secure the device to the bracket from step
Place the device on the bracket from step
using the included screw.
3.
Adjust the camera orientation (up or down) by changing the camera's angle to the stand.
• Be sure to have the mounting bracket installed by the dealer where you purchased the product
or a professional contractor.
• After installation, make sure that the CS-500 is firmly secured. Also, regularly check that there
is no possibility of the device falling or tipping over. We cannot be held responsible for
accidents caused by incorrect installation.
• After installation, do not lean against the CS-500 or apply a strong force to it from above. If the
device falls, injuries or damage may result.
• Screws for attaching the wall mounting bracket to the wall are not included. Prepare screws that
are strong enough.
• For details on screws and the installation, be sure to contact the dealer where you purchased
the product or a professional contractor.
1
. From the underside, secure the device to the wall mounting bracket by
Wall mounting
bracket
1
.
[Included with wall mounting bracket]
Device fixing screw (1/4 inch) for wall
mounting bracket
CS-500 User Guide
17
Setup and connections