Page 2
A Phillips head screwdriver and hammer is required for the assembly of this product.
Page 3
Part# Description Part# Description Top panel 01 pcs Drawer Front 02 pcs Left side panel 01 pcs Left side of drawer 02 pcs Right side panel 01 pcs Right side of drawer 02 pcs Center panel 01 pcs Drawer bottom 02 pcs Back panel 01 pcs...
Page 5
Step 1 Ø8*30mm Insert Wood dowel (Q) into part (4). Insert Wood dowel (A) into part (2), (3), (4), (5), (6), (7), (8), (10), (11) and (14). Ø8*40mm Step 2 Ø4,0*30mm Ø4,0*25mm Secure part (6) to part (2) and (3) with screw (B) and phillips head screwdriver. Secure part (16) to part (4) with screw (D) and phillips head screwdriver.
Page 6
Step 3 Secure part (4) to part (5) with screw (B) and phillips head screwdriver. Ø4,0*30mm Step 4 Secure part (5) and (8) to part (3) with screw (B) and phillips head screwdriver. Ø4,0*30mm...
Page 7
Step 5 Ø4,0*30mm Secure part (3) to part (7) with screw (B) and phillips head screwdriver. Step 6 Ø4,0*30mm Secure part (2) to part (5), (7) and (8) with screw (B) and phillips head screwdriver.
Page 8
Step 7 Secure part (7) to part (4) into pre-drilled Ø4,0*30mm with screw and phillips head screwdriver. Step 8 Ø7,0*60mm Ø7,0*40mm Secure part (15) to part (2) and (3) with screw (N) + (O). Secure part (15) to part (8) with screw (M) + (O).
Page 9
Step 9 Ø4,0*30mm Secure part (14) to part (8) with screw (B) and with screw and phillips head screwdriver. Insert hardware (P) to part (2) and (3) Step 10 Ø4,0*30mm Secure part (1) to part (2), (3) and (5) with screw (B) and phillips head screwdriver.
Page 10
Step 11 Secure part (10), (11) to part (9) with screw (B) and phillips head screwdriver. Ø4,0*30mm Step 12 Insert part (12) to part (10) and (11). P.10 P.10 P.10...
Page 11
Step 13 Secure part (13) to part (10) and (11) with screw (B) and phillips head screwdriver. Ø4,0*30mm Step 14 Insert Handle (F) with screw (E) and phillips head screwdriver. Ø4,0*22mm P.11 P.11 P.11...
Page 12
Step 15 Insert Wood dowel (L) into part (6) and (16) and phillips head screwdriver. Ø8*25mm Step 16 Ø8*25mm Insert Wood dowel (L) on the inside of the drawer with the drawer inside the unit, after having passe the wood dowel that is in the drawer runner.
Page 13
Step 17 Ø4,0*16mm Attach hardware (H) part (1), with screw (G+J) and phillips head screwdriver. P.13...
Page 14
Step 18 Wall anchor and hardware are included with this product. Please make sure hardware is suitable for your walls before installing, as different wall materials may require different types of anchors. Wall Ø6mm Ø4,0*25mm P.14...
Page 15
Step 19 Assembly Complete! Maintenance Guide To maintain long term performance and easy gliding of your solid wood drawers, we recommend applying wax to the wooden guide rails. 1. Bee's wax is recommended or Paraffin wax from a standard candle can be used. 2.