Start-Up The Screen Adjustment Menu - Panasonic LP-ADP50 Instruction Manual

2-1 Start-up the Screen Adjustment Menu

When adjusting the contrast or screen position of the touch panel console, display the display setting panel on the touch
panel console.
While the setting panel for screen adjustment is displayed, screen operation for the laser marker/laser welding machine is
disabled.
„ Start-up procedure of the screen adjustment menu
1.
Connect the touch panel console to your laser marker/laser welding machine.
2.
Turn on the key switch of the laser marker/laser welding machine. Wait until the start-up of the laser marker/laser
welding machine is completed.
3.
When the touch panel console is connected to LP-M/LP-S/LP-Z/LP-400/LP-V/VL-W1 series:
Touch the top left, top right, and bottom right corners of the screen within 5 seconds to show the setting menu of the
touch panel adjustment.
When the touch panel console is connected to LP-RH/LP-ZV series:
Open the "User selection/information" screen and select the "Touch panel
adjustment" button on the upper left to show the following dialog.
Touch the top left, top right, and bottom right corners of the screen within 5
seconds to show the setting menu of the touch panel adjustment.
14
(1)
ME-LPADP50-IM-3
(2)
(3)
"Touch panel adjustment" button