Table of Contents
Advertisement
1-1 Package
Before using this product, be sure to check the packed objects as shown below.
Touch panel console
LP-ADP50
1 unit
• For details on how to operate the laser marker/laser welding machine using the touch panel console, refer to the manual
for the laser marker/laser welding machine.
1-2 Specification
This product is a color liquid crystal display with a touch panel dedicated to our laser marker/laser welding machine.
This product is developed/manufactured for use in an industrial environment.
Item
Power voltage
Consumption current
Display device
Resolution
Viewing angle
Backlight
Operating ambient temperature *1
Operating ambient humidity *1
Protection degree
Material
Weight
Applicable laser marker/laser
welding machine
*1 : No condensation or freezing shall be allowed. If there is a gap between the stored temperature and operating
temperature, make sure to have the product get used to the operating ambient temperature gradually prior to use to
prevent the dew condensation.
10
□ Instructions before
□ General Information
using product
qty.: 1
Specification of LP-ADP50
DC24V±10% (supplied from laser marker/laser welding machine)
300mA or less
Color liquid crystal display with touch panel
10.1 inch TFT WXGA
1280 × 3 × 800 (pixel)
Omnidirectional: -85° to 85° (Typ.)
LED
0 to +50°C
For storage: -10 to +70°C
10 to 90%RH
For storage: 10 to 90%RH
IP54 (excluding the cable connector)
Case: PC + ABS
Cable: PVC
Approx. 1.5kg
LP-RH series
LP-ZV series
LP-M series/LP-S series/LP-Z series
LP-400 series/LP-V series
VL-W1 series
for Safety,
Compliance, and
Instructions
qty.: 1
ME-LPADP50-IM-3
Advertisement
Table of Contents
