Advertisement
6-5. Measurement in Wireless Radio Triggering Mode % (c-500R only)
The C-500R (only) incorporates a built-in radio transmitter that is compatible
with the PocketWizard® wireless radio system. When a PocketWizard® wireless
radio (Receiver or Transceiver) is connected to one or more electronic flash
units, its possible for the meter to trigger and measure the color temperature of
the flash simultaneously by pressing the Measuring/OK button.
Before using the Wireless Radio Triggering Mode, it is necessary to set the
meter and the PocketWizard® (Receiver or Transceiver) the same radio channel
(and Quad Triggering Zone).
[Reference]
@If you have already set the channel to be used, proceed to the next section "6-5-2 Measurement
in Wireless Radio Triggering Mode".
6-5-1.
Selecting Radio Triggering Channel and Quad-Triggering Zone Mode \
Once you have selected Wireless Radio Triggering Mode, it is necessary to
select a radio triggering channel to be used. There are up to 32 channels
available for wireless radio triggering. Channels 1 - 16 are single channels.
Channels 17 - 32 contain selectable Quad triggering zone (A, B, C, or D). Each
Quad triggering zone can be set to trigger independently from the others.
Depending on which Quad triggering zone is selected, it is possible to trigger
one or more Quad triggering zone at the same time. Up to four zones can be
triggered simultaneously.
LPA Design, manufacturers of the PocketWizard® wireless system currently
offer two systems.
The PocketWizard Plus II (4-channel radio) and the MultiMAX (32-channel
radio).
1) While pressing the MODE button E, turn the Jog wheel El to select to Fy
adio Triggering Setting Mode. (See P11)
p13 ] is displayed in the dot matrix display of the LCD
screen, showing the currently-set channel number.
2) Select the channel (CH) number you wish to set.
For channels No.1~16:
1. Turn the Jog wheel El to select the channel No. and press the
Measuring/OK button EA to confirm. The Wireless Radio Triggering Mode
measurement screen will be displayed.
2. Proceed to the next section "6-5-2 Measurement in Wireless Radio
Triggering Mode".
23
Advertisement
