Advertisement
5-4. Setting the Display Mode
The C-500R/C-500 has four different display modes: Color temperature, LB index
and CC index, LB filter number and CC filter number, and simplified illumination.
re
mm
Press the blue DISPLAY selecting button to select the desired display. The
/ cc
display mode will change each time the DISPLAY selecting button is pressed.
Bor
with the readout describing that reading.
ul
g eeum
T
l
Nur
N
P
r
TR
DISPLAY selecting Button EJ
Display Modes when using "Digital" mode:
@Visual color temperature / CC index (displayed in K and CC)
Visual color temperature - - - This displays the actual color
temp in K (Kelvin) of a scene based on the visual spectrum
of the human eye or typical digital camera sensor. This
measurement can be directly be entered into the
color temp setting of your digital camera.
CC index - - - The displayed CC (Color Correction Value) provides the
necessary color correction, if the measure
light source is overly bias towards a particular color.(1 CC index = 2.5 CC
filter number)
@LB filter number / CC filter number (displayed as LB
an B&F
oom SEDER
FILTER and CC FILTER)
co
eM
Select this display when using Kodak Wratten or LEE
aaa
filters to adjust the light source to the
ane
selected color temperature. (see P48). Fujifilm
Visual Color Temperature + CC Index
j
i
j
LB Filter No. + CC Filter No.
ee
can be selected in custom settings.
(Display in Kodaki LEE Filters)
Hote )
@Due to the characteristic of digital sensor, there might be a possibility that enough effect of
filters are not obtained.
@LB index / CC index
EB 4 fofr
oema
LB index - - - Displayed in MK" (LB index increments is selectable in
custom settings. See P41). Select this display mode when using filters
compensated in LB Index values.
CC index - - - The displayed CC (Color Correction Value) provides the
necessary color correction, if the measure light source is overly bias
LB Index + CC Index
towards a particular color. (1 CC index = 2.5 CC filter number)
12
Advertisement
