Advertisement
@Simplified illuminance in ambient light mode
mtr
Select this display when you measure the brightness
of a continuous light source. The measurement
will be displayed as Ix (Lux) or FC (Foot-candle) as
selected in the custom settings mode (See P 41)
Illuminance Measurement
(Display in lux)
(Note )
@The simplified illuminance value displays the first 3 digits of the measured value, and is used
as a reference for consistent light amount for photography, video or cinematography
applications. It is not recommended to use for actual exposure values or calibration purposes.
Display Modes when using "Film" mode:
@ Photographic color temperature (displayed in K)
This displays the actual color temp in K (Kelvin) ofa
scene based on the sensitivity of traditional
film. The measured values are similar to other
photographic color temperature meters.
@LB filter number / CC filter number (displayed as LB
FILTER and CC FILTER)
Select this display when using Kodak Wratten or LEE
filters to adjust the light source to the
selected color temperature. (see P48). Fujifilm
LBB/LBA filters can be selected in custom settings.
LB Filter No. + CC Filter No.
(see P41).
(Display in Kodak/LEE Filters)
@LB index / CC filter number (displayed as LB and CC
IHR
FILTER)
LB index - - - Displayed in MK" (LB index increments
can be selectable in custom settings. See P41). Select
this display mode when using filters compensated in
LB Index values.
LB Index + CC Filter no.
CC filter number - - - Displayed in Kodak Wratten or
LEE Color Compensation filters(see P48). Fujifilm CC
filters can be selected in custom settings. (see P41).
13
Advertisement
