Playing Back Recordings - Panasonic Palmcorder PalmSight PV-L50 Operating Instructions Manual

Playing Back Recordings
Before you begin...
* Connect Camcorder to power source.
* Insert recorded tape.
1 Press LCD-OPEN and swing LCD
monitor fully open.
* |f you want to playback on EVF,
close and lock LCD monitor.
2 Set POWER to VCR.
(PV-L60 shown) Power lamp lights.
Speaker * If tape has no record tab, auto
playback begins.
* EVF or LCD monitor turns on/off by
the POWER switch.
* EVF shuts off when LCD monitor is
opened and turns back on when
LCD is closed.
VA ES
3 Playback function buttons.
Q REW(ind) : rewind tape.
©) PLAY : play tape.
(9 sTOP : stop tape.
(9 BRIGHT : adjust LCO monitor
brightness.
(3 VOLUME ` Adjust volume of
speaker.
Press "T" : Volume up(+).
Press "W" : Volume down(-).
VOLUME [-] ITli---- [4]
Note:
* Using LCD monitor reduces battery
operating time.
e Return LCD monitor to locked position
when not in use.