Installation
Required Network Settings
An Ethernet connection with the Dynamic Host Configuration Protocol (DHCP) must be used to connect
the AC12 to the Local Area Network (LAN). You also need to configure firewall settings to communicate
with the AC12.
TCP port 443
●
UDP port 123 (NTP time synchronization)
●
Multi-Media Access Control (MAC) address presence for single port in passthrough mode
●
26
Verkada Inc. 406 E 3rd Ave, San Mateo, CA 94401
sales@verkada.com
All specifications are subject to change without notice
Copyright © 2023 Verkada Inc. All rights reserved.